Page 2 of 2
Re: FB wagon front wheels
Posted: Sun Sep 21, 2025 8:13 am
by Errol62
They will be 4.24 or 4”, if early Val. I’ve been caught there. Measure inside to inside opposing holes will be close.
Sent from my iPhone using Tapatalk
Re: FB wagon front wheels
Posted: Sun Sep 21, 2025 8:17 am
by Errol62
Precisely, stud centre spacing / 0.5878 = PCD.
Sent from my iPhone using Tapatalk
Re: FB wagon front wheels
Posted: Sun Sep 21, 2025 9:10 am
by Blacky
Can measure like this to get a good idea -
Sent from my iPhone using Tapatalk
Re: FB wagon front wheels
Posted: Sun Sep 21, 2025 9:13 am
by Errol62
Early Holden are 63.3mm between adjacent studs.
Sent from my iPhone using Tapatalk
Re: FB wagon front wheels
Posted: Mon Sep 22, 2025 3:51 pm
by fjute
Thanks fellas ...very helpful ,thought about spitfires ,however I will stick to the old style 5 slot jellybean type as Im old and grey myself!!
Did some accurate measuring on the front with a 15 inch rim and because diameter is bigger looks like a 4 inch backspace will clear control arm and tie rod end ,so going for new = 15" CTM US Indy / Eliminator Alloy Wheels 15x7.
Not ideal size as would prefer 14 inch but will go for it anyway .I suppose this is what happens because i have retired and have plenty of time to think and research .
Thanks again fellas ,if this works out i will send some photos ...if it doesn't you will hear me crying from the my shed !!!!
