fbekholden.com

You might want to put a couple more bolts in that flywheel ( or liquid nails).

60Special wrote: Sun Apr 25, 2021 9:01 am You might want to put a couple more bolts in that flywheel ( or liquid nails).

I'm on th ecomputer right now trying to find some on Gumtree , I cant use facebook because I am banned again .........

Not as much progress as I hoped, the starter motor in the tray isn’t for a 308 need to source one on Tuesday - got sidetracked cleaning up the shed which was looooonnng overdue , took a ute load of crap to work and tossed it in the skip bin seeing as the tip is closed , grabbed the buff and threw it over the bonnet to see how it would shine up - not bad





Sent from my iPhone using Tapatalk

No CAS in the 304, still has a dissy with a ignition module, the box with the transister behind the air filter box.

ehsv6 wrote: Mon Apr 26, 2021 3:34 pm No CAS in the 304, still has a dissy with a ignition module, the box with the transister behind the air filter box.

My bad. My VS had only the poverty-pack Ecotec

Cheers,
Harv

Much shinier now

P


Sent from my iPhone using Tapatalk

Blacky

dunno if these even fit or if you’re looking for some new wheels for the red rocket. I’ve got these that I’ve had for probably 15 years. Found them again in the shed on the weekend when looking while on the hunt for something else. I’m not going to use them anytime soon. I think they are the same as the VZ SS rims. These are 17’s. If you’re semi interested let me know and I’ll have a chat to you when you get to Toowoomba.
Cheers, Andrew

Thanks for the thought Fex but I have a set of rims off the brides old WL Caprice that are going on to it

Blacky wrote: Mon Jun 07, 2021 9:26 pm Thanks for the thought Fex but I have a set of rims off the brides old WL Caprice that are going on to it

Almost got this hooker done , motor has been rebuilt and is back in the hole , waiting on a couple of bits and it should be good to fire up , the extractors I bought hit the crossmember so I was going to take it to a shop but I might have a go at it myself after seeing Rogers efforts ….



Sent from my iPhone using Tapatalk

Pulled the fuel tank out - was about an inch deep of dust and sticks and leaves etc - some things never change !!!




Sent from my iPhone using Tapatalk

Blacky wrote: Tue Sep 21, 2021 10:09 am Pulled the fuel tank out - was about an inch deep of dust and sticks and leaves etc - some things never change !!!

That must be the first Holden posted on this forum that has an intact fuel tank floor. Must have had the NASCO Rust Option deleted at the factory

Cheers,
Harv

Harv wrote: Tue Sep 21, 2021 11:13 am

Blacky wrote: Tue Sep 21, 2021 10:09 am Pulled the fuel tank out - was about an inch deep of dust and sticks and leaves etc - some things never change !!!

That must be the first Holden posted on this forum that has an intact fuel tank floor. Must have had the NASCO Rust Option deleted at the factory

Cheers,
Harv

Give it time mate .........

Finished this thing off today - painted the front bumper last week , have been waiting for the autosparky to finish for a month - gave up yesterday and went and picked it up to finish it off. Mounted the bumper, fixed the exhaust- that’s a story in itself - adjusted the handbrake and refitted the console and it’s ready for a wheel alignment and rego

Sent from my iPhone using Tapatalk