fbekholden.com

Hi Clay, dont forget your needy ute friends if you have one ute and two spare wheel doors

The sill needs to come up in the middle


Sent from my iPhone using Tapatalk

Got a panel van Brett


Sent from my iPhone using Tapatalk

I managed to straighten the sill within a mm or so but hinge still sits low.
Even though the lower sill looks the same as the van, which I know is original, it measures 3mm narrower. Possibly I ground that much off it tidying things up but I am surprised. I think I’ve got factory intolerances adding up. Decided to weld on an extra 8mm of 1.6 mm to mount the hinge.


FB ute fixer upper, EK van on rotisserie

Happy how it came out


Sent from my iPhone using Tapatalk

Off to mitre ten for some stubby self tappers and a decent bit. All my smaller ones are broken or baf.


FB ute fixer upper, EK van on rotisserie

8g screws

One side is sitting proud 3mm. Might have to give it a twist. Fingers crossed the bog doesn’t crack.


FB ute fixer upper, EK van on rotisserie

Errol62 wrote:
8g screws

One side is sitting proud 3mm. Might have to give it a twist. Fingers crossed the bog doesn’t crack.


FB ute fixer upper, EK van on rotisserie

Thoroughly enjoying watching the progress.

Sent from my SM-G975F using Tapatalk

Blow by blow Kym
Just realised this thread is up to 1000 on Tapatalk
Cheers
Clay


FB ute fixer upper, EK van on rotisserie

And some, didn't realise the work the old girl needed. Was WAY out of my league.

Sent from my SM-G975F using Tapatalk

Been a steep learning curve and I’m barely competent. I think its passion wots required. The rest comes with time. I’m going to need plenty of both for the longer term job of resurrecting the van. The ute is a perfect segue to the van being easier to get some fun happening while skilling up. I count myself lucky to have stumbled on this car, and the unbelievable tolerance of Elle, my wife, not to mention all the good advice from forum members and others.


FB ute fixer upper, EK van on rotisserie

Hi Clay, just a bit of forward planning for me but will a 185 radial fit inside the ute spare wheel space?

Yes I’m getting to that but I think the answer is dependant on how many psi it’s pumped up to......


FB ute fixer upper, EK van on rotisserie

Reason I ask is I was about to buy 185 80 13s for both sedan and ute but will only buy 4 185s for ute if they don't fit!

5hats good if you can get 80 series Brett. If you can get 175 be better on stock rims. 185 is perhaps overloading the 4 1/2” rim imho. More suited to a 6” rim.
I’ll see if I can find a 185 and try it. Stock tyres were 6.40 crossply which are about 165.


FB ute fixer upper, EK van on rotisserie