Tailgate Wanted
Tailgate Wanted
Chasing a tailgate for my Panelvan in any condition, the inside bottom section has rusted out. I know i can buy an outer skin and i was thinking if i could get hold of one in similar condition to mine that i could cut the middle flat section out and move it down and bend it to original shape. Any other suggestions considered. i would like to keep the factory pressed metal look
If you can’t convince them, confuse them.
-
vintageholden
- Posts: 575
- Joined: Fri Sep 07, 2007 5:58 pm
- State: NOT ENTERED
- Location: W.A carlisle 6101
mine is the same.....
if you get offered more than 1 can you let me know please
keith
if you get offered more than 1 can you let me know please
keith
Last edited by vintageholden on Tue Jan 26, 2010 8:07 pm, edited 1 time in total.
Re: tailgate
FE/C ute tailgates are the same - that one of yours doesnt look too bad - very repairable. Make yourself a buck and that pressing would be easy to form.lexumus wrote:No wukkers, i am led to believe that FE/FC tailgates are the same-ish ??
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
-
vintageholden
- Posts: 575
- Joined: Fri Sep 07, 2007 5:58 pm
- State: NOT ENTERED
- Location: W.A carlisle 6101
tailgate
if anyone is going to the Bathurst Swap Meet on Feb 7th and there is one there could they get me the guys Ph No and pass it on to me, (and Keith) thx lex 0427 785017
If you can’t convince them, confuse them.
-
bootlegger
- Posts: 2070
- Joined: Sat Sep 26, 2009 7:52 pm
- State: NOT ENTERED
- Location: sydney