FB/EK ute ...... mission accomplished! thanks

Looking for a new daily driver, the next project, or maybe a parts car? try here first...

Moderators: reidy, Blacky

mrs ratbox

Post by mrs ratbox »

can't be defected for mods that he has engineers reports for which is all his mods
oldnek
Posts: 1518
Joined: Sun Nov 19, 2006 9:15 pm
State: NOT ENTERED
Location: Ulladulla NSW

Post by oldnek »

Only legal in his State, as I said before....All depends if the Officer or inspector has had a shit of a day as to what mood there in.
If your a smartarse, they'll defect a brand new car if they see fit, just to make it a pain for you to get it cleared.

Regards John
There's nothing as Sweet as a EK V8
mrs ratbox

Post by mrs ratbox »

well then that's a different matter then, that's just a cop being a dikhead not defecting the car for mods that are not correct for the state it's being driven in, my mates been through it and won
User avatar
Cal
Posts: 2796
Joined: Sat Nov 08, 2008 8:07 pm
State: NOT ENTERED
Location: Sydney

Post by Cal »

oldnek wrote:
EK283 wrote:Gary is certainly a lucky bugger livin up North!

NSW says no tubs :roll: :roll: :roll: :roll: No engine greater than 327 normally aspirated as well :evil: :evil: :evil: :evil:

You know state rules are just plain dumb. If Gary drives his vehicle down South whats the difference if its registered up North???
He Still has to be careful so Not really, it can be still defected here in NSW, even if its regoed in another state........it all depends on how nice the authorities want to be.

Regards John

I once got defected in Victoria for my XD being too loud. Mind you, it would've copped a defect in NSW too :oops:

I had the exhaust dumping straight out of the mufflers - no tailpipe

Worst part was I was leaving for Sydney the next day, so I had to get a tailpipe put on and get the defect removed before I left.
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Post by CHOPPED »

mine runs 265s on the back on 8 inch rims and tubbed
it cruzed through rego without a hicup
HEY IT WASNT ME
vintageholden
Posts: 575
Joined: Fri Sep 07, 2007 5:58 pm
State: NOT ENTERED
Location: W.A carlisle 6101

Post by vintageholden »

CHOPPED wrote:mine runs 265s on the back on 8 inch rims and tubbed
it cruzed through rego without a hicup
any photos of the tub......
are you allowed different size tyres front and back???
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Post by CHOPPED »

my ute runs 5s on the front again breezed through rego that was in 2005 i do know that the rules have changed heaps since then and was told i would have no chance getting it licenced in the current format theres a 5 page spread in street machine magazine august 05 should tell you every thing you need to know about the car :)
HEY IT WASNT ME
gasman69
Posts: 86
Joined: Fri Oct 30, 2009 4:24 pm
State: NOT ENTERED
Location: Bunbury
Contact:

Post by gasman69 »

if the vehicle is built to the current code of practice, rego in WA is no problems. my ute went over nearly first time....4dB tooooo loud from the exhaust???? but apart from that lic with 350 no drama. All the info is on the web.
dave
User avatar
V8EK4us
Posts: 1541
Joined: Sat Feb 09, 2008 12:12 am
State: NOT ENTERED
Location: Mildura - Vic

Post by V8EK4us »

CHOPPED wrote:my ute runs 5s on the front again breezed through rego that was in 2005 i do know that the rules have changed heaps since then and was told i would have no chance getting it licenced in the current format theres a 5 page spread in street machine magazine august 05 should tell you every thing you need to know about the car :)
8) 8) 8) 8) 8) 8) Gotta see this ute one day Paul (and go for a cruise!) I will be back in Perth around 26 - 31 Jan to set my young bloke up for uni, maybe we can catch up?
User avatar
(AUST)Mod
Posts: 2272
Joined: Sun May 07, 2006 11:16 pm
State: WA
Location: Perth

Post by (AUST)Mod »

V8EK4us wrote:
CHOPPED wrote:my ute runs 5s on the front again breezed through rego that was in 2005 i do know that the rules have changed heaps since then and was told i would have no chance getting it licenced in the current format theres a 5 page spread in street machine magazine august 05 should tell you every thing you need to know about the car :)
8) 8) 8) 8) 8) 8) Gotta see this ute one day Paul (and go for a cruise!) I will be back in Perth around 26 - 31 Jan to set my young bloke up for uni, maybe we can catch up?
Which Uni is he going to?
Craig wrote: Andrew you have a red so I wouldn't race it :wink:

Image
Harko
Posts: 2387
Joined: Fri Apr 07, 2006 9:36 pm
State: NOT ENTERED
Location: Shellharbour

Post by Harko »

Id tow the ute with the sedan :) by the sounds of it .
Easily distracted angle manipulator extrordinaire.
User avatar
V8EK4us
Posts: 1541
Joined: Sat Feb 09, 2008 12:12 am
State: NOT ENTERED
Location: Mildura - Vic

Post by V8EK4us »

Hi Andrew,
Ryan (my eldest) has been at UWA for 2 years studying Psychology, Braedon is going to Curtin to do Achitecture.
User avatar
(AUST)Mod
Posts: 2272
Joined: Sun May 07, 2006 11:16 pm
State: WA
Location: Perth

Post by (AUST)Mod »

I think you should send your EK down for your son to drive whilst at Curtin. On the odd occasion that I have taken my FB to Curtin, it has been well received by both staff and students :lol:
Craig wrote: Andrew you have a red so I wouldn't race it :wink:

Image
User avatar
V8EK4us
Posts: 1541
Joined: Sat Feb 09, 2008 12:12 am
State: NOT ENTERED
Location: Mildura - Vic

Post by V8EK4us »

(AUST)Mod wrote:I think you should send your EK down for your son to drive whilst at Curtin. :lol:
:shock: :shock: :shock: :shock: :shock: :shock: .............. you obviously have not see my son DRIVE!! I love my son's, but I love my EK too!! :wink: :lol: :lol:
User avatar
CHOPPED
Posts: 1193
Joined: Mon Feb 20, 2006 12:09 am
State: NOT ENTERED
Location: PERTH WA

Post by CHOPPED »

hey gary just give me a call on the mobile mate when you get down no probs
HEY IT WASNT ME
Post Reply