My wipers wont work through the switch.
Going off original plugs and wiring diagrams this is how I think it should be wired so my first question is is this right?
If this is right then..
I have continuity across pins 1,2,3 and 10. I assume 1 to 10 is right for power to squirty. Is continuity across 1,2 and 3 right? with the power in at 1 I have power at pins 5 and 7 on the switch.
Does power go from fuse to motor to switch back to motor to let wipers park after switched off? Instead of going power-switch-motor
On the switch in off position there is continuity across pins 5 and 6 only
in position 1 I have contunuity across 5 and 9
and pos 2 across 7 and 9
But 9 is tabbed off to not use
so if im thinking right the switch should . And right at this point is when I figured that 9 is to be groung
Problem solved