blue motor dizy

basic.green · Post by **basic.green** » Wed Oct 14, 2009 2:42 pm

Hi all when putting a blue motor dizy and coil in do you wire it up the same as the red
any help would be great

NoMAD · Post by **NoMAD** » Wed Oct 14, 2009 3:33 pm

try this one...

http://gallery.oldholden.com/ReaperHR/H ... _Ignition/

cheers
NoMAD

basic.green · Post by **basic.green** » Thu Oct 15, 2009 9:15 pm

Thanks NoMAD
i still dont get it
the wiring gets me

i will have to get it done buy some one one day

thanks

Trev · Post by **Trev** » Fri Oct 16, 2009 3:21 am

I had trouble with this as-well, as far as these instructions go the only wire that goes to the negative side of the coil is the green one off the dizzy, then the pinky brown one goes to the positive with the other one that comes from your ignition, hope this helps, Trev

.

Devilrod · Post by **Devilrod** » Fri Oct 16, 2009 12:24 pm

What Trev said, we rang him when doing mine as the autoelec couldn't remember

stinky · Post by **stinky** » Fri Oct 16, 2009 2:59 pm

Like the others.
From my dizzy the pink/peach coloured wire goes to the Positive of the coil. the Green wire to the negative.

The pink from the wiring loom goes to the positive and the Purple to negative.

basic.green · Post by **basic.green** » Sun Oct 18, 2009 8:33 pm

Thanks for all your help

i think i only have one pinky wire to the pos and the green to neg from dizzy
if i wire it up like that will that work
thanks guys