rotisary

ek350 · Post by **ek350** » Sat Sep 12, 2009 1:05 pm

does any 1 have the specs or tell me how to build a rotisary 4 my ek need to get it on its side dont realy want to roll it onto a mattress thx

careyman · Post by **careyman** » Sat Sep 12, 2009 8:06 pm

Try here
http://www.mts.net/~hpokrant/Restoratio ... sserie.htm

Post by **reidy** » Sun Sep 13, 2009 8:22 pm

Hey ek350, where in Vic are you?

ek350 · Post by **ek350** » Thu Sep 17, 2009 8:22 pm

im in sth gippsland 30 min fron cranie and packy

ek350 · Post by **ek350** » Thu Sep 17, 2009 8:23 pm

and thx heaps 4 the site looks great thx again

EK DAZ · Post by **EK DAZ** » Sun Sep 27, 2009 5:35 pm

Hi There mate , I have just finished one and will try two put some picks on. I used some old EJ hubs and stubs and turned the knuckles off the back , so the whole car spins on bearings. The important measurement is 1025 mm from the hub centre down to the top of the lower support bar. Regards Daryl.

EK DAZ · Post by **EK DAZ** » Mon Oct 05, 2009 8:07 pm

mrs ratbox · Post by **mrs ratbox** » Mon Oct 05, 2009 9:22 pm

saw a nifty invention on ozrodders don't know how to do the link thing but it was made of timber bolted front and back with like a 1/4 circle on one end and you just roll it up