EK WAGON TAILGATE

EK DAZ · Post by **EK DAZ** » Sun Feb 18, 2007 6:54 pm

Hi guys
On the inside of the upper tailgate on the inside lower face (hope this makes sence) there are two 5mm holes approx 45mm apart,does anyone know what these are for? All of my other upper gates have these ass well.
regards EK DAZ.

EK DAZ · Post by **EK DAZ** » Wed Feb 21, 2007 5:38 pm

Many thanks for your reply.The holes face into the cabin area and been
the door that closes first, they dont bump against any thing.I thought perhaps they were for an internal handle of some sort ? What-ever they are for, they were ideal for pouring the fish oil into .

smooth · Post by **smooth** » Wed Feb 21, 2007 5:47 pm

The holes you are talking about are for a bump rubber to allow the upper tailgate to rest on the lower tailgate when the lower tailgate is in the up/closed position.

I wouldn't recommend you dive it like this or drop the top gate on to the bottom gate but if you place it softly it is OK. Well, at least it's not metal on metal!

The bump stop in a longish rubber about 2 to 2 1/2" long and has two tits that push into the the two holes you speak off.

Regards, Smooth

EK DAZ · Post by **EK DAZ** » Thu Feb 22, 2007 4:55 pm

Many thanks Smooth,All my years of playing with these models,I have never seen one of these rubbers fitted.So im now on the lookout for something with two tits!.

smooth · Post by **smooth** » Thu Feb 22, 2007 5:47 pm

Yeah I'm always looking for them!

I have one fitted to my wagon, She's a ripper too!

Regards, Smooth