i had an alfa 5 speed in my flat blue sedan and that came up well infront of the seat
i looked at an FE with a celica box that came up just infront of the seat but my wagon has to have a cut out, but i'm pretty sure with the celica box there is shift position variations
I had an FB Ute with a Celica 5 speed. The bench had a slight cut out, but a straight gear stick, if you went a bent gear stick with the original bench seat, it would clear from memory!!!
im doing this conversion in my ute as we speak ive got a eh bench seat and it looks like ive got to make a custom lever to clear the seat
regards fatboy
I couldn't imagine there would be much difference in shape from an EH seat to an FB seat. How much do you have to change the shape of the shift.
A picky of the finished article would be good if you can when its done.
ill document everything and take pics .Ek seat front goes straight down eh has a slight slope at the bottom the s in the shifter will probably be around the 60 to 80 mm mark.Main concern if the seat is moved forward then the shifter will bind so will do a template tomorrow and get some rod bent and try it out tomorrow night when i get home from work
regards fatboy
Charging camera now to take pics tomorrow of how i cut it up In the centre of the bench i cut out roughly 160mm back into the seat and 160mm wide so when the seat is pushed forward it still works perfectly
regards fat
so what was the verdict guys cause i really dont want to cut my seat and i havent put my celica box in yet if it cant be done i may have to go auto instead