Clay’s Wedgewood Blue FB Ute

Harv · Post by **Harv** » Sat Dec 18, 2021 12:16 pm

Errol62 wrote: ↑Sat Dec 18, 2021 11:59 amI’m not sure if the roller rockers will fit under a factory cover. I was intending to put one on with 179X2 decal.

You could have an arts-and-crafts day and make up a spacer to go under the factory rocker cover. Ally or PTFE would do it.

Cheers,
Harv

Errol62 · Post by **Errol62** » Sat Dec 18, 2021 2:30 pm

Someone on the torana forum cut and shut one but still hit rear valve.

This should look the part.

Sent from my SM-G781B using Tapatalk

Errol62 · Post by **Errol62** » Sat Dec 18, 2021 5:22 pm

Fitted a passenger side mirror, which is actually just another driver side stalk. Nasco lens would only point down and away from the side, so swapped to another lens wiith more articulation.

Sent from my SM-G781B using Tapatalk

ekv8ute · Post by **ekv8ute** » Sat Dec 18, 2021 9:33 pm

That’s pretty

Sent from my iPhone using Tapatalk

Orange Betty · Post by **Orange Betty** » Sun Dec 19, 2021 12:14 pm

Looks great Clay

Dave

Errol62 · Post by **Errol62** » Sun Dec 19, 2021 12:58 pm

Thanks fellas. Still may grind the fins off so I can put the decal on.

FB ute fixer upper, EK van on rotisserie

BILLY BLACKARROW · Post by **BILLY BLACKARROW** » Sun Dec 19, 2021 1:01 pm

Leave the fins alone they look good

Errol62 · Post by **Errol62** » Mon Dec 20, 2021 9:16 am

OK Billy.

Dropped ute to exhaust shop for rectification.

One of my Sampson's has a slow leak. Turns out the rim has gone a bit porous. Solution is to strip and paint the inside.

Sent from my SM-G781B using Tapatalk

EK283 · Post by **EK283** » Mon Dec 20, 2021 9:22 am

Paint the inside of the rim with por15, that will seal it and be hard as nails !!!

Greg

Errol62 · Post by **Errol62** » Mon Dec 20, 2021 10:15 am

I think I will use Epotec Greg.

FB ute fixer upper, EK van on rotisserie

oz_ek · Post by **oz_ek** » Tue Dec 21, 2021 10:14 pm

Errol62 wrote: ↑Sat Dec 18, 2021 11:59 am I’m not sure if the roller rockers will fit under a factory cover. I was intending to put one on with 179X2 decal.
FB ute fixer upper, EK van on rotisserie

Any help?..... http://www.kustombitz.com.au/p/4252638/ ... -10mm.html

Errol62 · Post by **Errol62** » Wed Dec 22, 2021 5:29 am

Thanks Phil, that is a very good idea. Gee the costs start mounting. You know what a Gumtree bargain hunter I am. Alloy rocker cover cost me about $50 delivered.

Column is with Roger Hancock so saving pennies for that at the moment.

FB ute fixer upper, EK van on rotisserie

Errol62 · Post by **Errol62** » Wed Dec 22, 2021 10:31 pm

Bloody annoyed now as the roller rockers seller contacted me through ebay to say he has cancelled my order. Apparently their stock was incorrect and won't be replenished until February. I was prepared to wait and currently seeking to get the order reinstated.

Sent from my SM-G781B using Tapatalk

FbSTDwagon · Post by **FbSTDwagon** » Thu Dec 23, 2021 12:31 pm

Cant contact Yella Terra direct for a set or rollers?

Playing with other brands is touch and go from what I have heard.

Errol62 · Post by **Errol62** » Thu Dec 23, 2021 5:47 pm

Crow are pretty reliable. What you heard Drew? Yellow Terra are out of my price range.

Sent from my SM-G781B using Tapatalk

fbekholden.com

Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute

Re: Clay’s Wedgewood Blue FB Ute