REAR leaf springs HR front steel bush

[superstock]

Hi guys, when fitting hr leaf springs to fb do you use the rubber steel tube hr bush in front eye. Or fb standed rubber ones. Many thanks wayne.

[fingers]

Hi guys, when fitting hr leaf springs to fb do you use the rubber steel tube hr bush in front eye. Or fb standed rubber ones. Many thanks wayne.

.....................................................................................................................................
I had a problem fittting HR springs to an FB ............the HR springs were too long by about 2 inches...........check for length mate

[superstock]

Thanks for your reply fingers, I made spring mounts on volvo diff. When ground to sit on diff they sit down 2/1/2" which make rear spring hangers sit forword about 15% so if I can push hanger back past vertical will be good. So do I use the HR front steel/rubber mounts or FB/EK rubbers. Many thanks wayne.

[fingers]

Thanks for your reply fingers, I made spring mounts on volvo diff. When ground to sit on diff they sit down 2/1/2" which make rear spring hangers sit forword about 15% so if I can push hanger back past vertical will be good. So do I use the HR front steel/rubber mounts or FB/EK rubbers. Many thanks wayne.

...................................................................................................................................................................................
Sorry mate I didnt get that far ......but if you can use the FB EK rubbers and pin, I would go with that ....Fingers

[superstock]

Hi fingers, good will go that way. Many thanks wayne.