Hq stub axles to hr front end

Includes shock absorbers, springs and steering linkages.

Moderators: reidy, Blacky

Post Reply
flamen
Posts: 21
Joined: Sun May 01, 2011 4:22 pm
State: NOT ENTERED

Hq stub axles to hr front end

Post by flamen »

Hey guys, I was just wondering if hq stub axles will bolt straight onto a hr front end, or if this would create any problems, thanks
Top
Blacky
Posts: 13410
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: Hq stub axles to hr front end

Post by Blacky »

Yeah mate, they go straight on.
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Top
jack_fc
Posts: 141
Joined: Sun Nov 18, 2007 9:32 am
State: NOT ENTERED
Location: West Vic

Re: Hq stub axles to hr front end

Post by jack_fc »

...and will lower the car by about an inch (?). An issue for some could be that they also move the rim out by about 1/2 to 3/4 inch (?) potentially causing tyre clearance problems specially if using lowered springs and wider rims as well. Rim offsets may require some juggling...

someone else may have some more accurate figures?

cheers, jack
Top
Post Reply

Return to “Suspension and Steering”