Diff housing mod's

[Marko]

Hi Guys,

I am looking for a workshop that can cut down housings, axles and re-assemble the centre.

I have spoken with the guys at WA Diff and Final Drive, cost so far is about $1200 if I deliver the complete assembly still together.

I would strip it down myself however a little scared about re-assembling the centre, as I have never done a 10 bolt.

Does the price seem ok??

Cheers Mark

[sixty4]

Hi

Mate Phil is the best at final drive but been told he only does 9 inch diff now if he cuts its but won't build it try todd at cawley automotive in cannington he's good and used to work at W.A diff centre

Brad

[vintageholden]

what are you trying to do???

[Marko]

Hi Vintageholden,

I currently have 95mm clearance between my brake drum and the rear guard,

I have purchased 15x7 street pro's for the rear and need 113mm plus tyre bulge (maybe 20mm) = 133mm.

I there for need to cut my 10 bolt down by 38mm each side.

It would be easy to stick with shallow dish HQ stud wheels but thats not the look I am after. I wish it was, it would be loads cheaper!!

I was unable to get much info on the cheaper street pro's (than convo pro), so I took a gamble and ordered some to check it out for myself.

The street pro's meet aussie standards as the convo's do not, the look pretty good, 1 piece full alloy.

20130423_165646 (500x375).jpg (134.71 KiB) Viewed 1329 times

20130423_165730 (500x375).jpg (136.1 KiB) Viewed 1329 times

Certainly open to advice etc.

The van should arrive here early next week, time to do some driven.

Cheers Mark

20130328_165220 (500x375).jpg (138.89 KiB) Viewed 1329 times

Engine Bay (640x480) (500x375).jpg (149.99 KiB) Viewed 1329 times

[vintageholden]

do 10 bolts have a short and long axle?
shortened my borgewarner by using 2 short shafts..in my ek ute...

[Marko]

unfortunately not, gas axe it is.

[WesternWagon]

Bat on the Forum dose the V6 conversions shortens diffs I'm think

I would try a pipe cutter will give you a nice square cut. I paid $800 for my BW with billet axless,

PS love the rims.

Cheers

Gazza

[gasman69]

Try Phil Hutton, he is mobile and has a workshop in Busso. Phil was in Qld and now over here.
his number is 0415 745 703

[Marko]

Thanks WW, sent BAT a PM

Cheers Dave, I will give Phil a call aswell.

Thanks for your help, looking forward to taking a cruise in the van to Perth to actually met a few of you guys, at the moment all I am is a name.

Mark

[CHOPPED]

let me know when your in perth mate
will join you in the ute
paul

[bat53retro]

g'day marko all
just got back on
haven't received pm but i do diffs


cheers bat