No plate lenses

[BILLY BLACKARROW]

Hi all
Can anyone help me track down the lenses for station wagon No plate lights EBay has sedan lights but I cant find station wagon
Thanks BILLY

[Smooth customs]

I have made a set for a wagon I am doing for a customer

[BILLY BLACKARROW]

Hi Smooth Customs
They are really smooth much work involved how much to make a second set
BILLY

[Trev]

I made mine out of the plastic covers for a fluorescent light, they fit inside the overriders before they are bolted back on.

[Sputzwagon]

yeah...what Trev said...I made my light cover's out of old perspex I found for my wagon..
It's not rocket science...Paul HAD to make those for Benny's wagon because it's a customer's job!
The hardest part is to make the little "legs" that hold the thing in place, I did mine with a heat gun (electric paint stripper, 'ya know those over-powerful hair dryer things!) and bent 'em around a bit of steel off cut, then cut & glued them to the lens with superglue. As for the frosted look you can always lightly spray the inside with a mixture of clear and white.
It's easy if you give it a go, Billy.

Scotty.

[Sputzwagon]

I made mine out of the plastic covers for a fluorescent light, they fit inside the overriders before they are bolted back on.

Must be a bugger if you blow a bulb, Trev!!!

Scotty.

[BILLY BLACKARROW]

I know it's not hard to make but sometimes you just get sick & tired of making stuff------- I like a lot of you have made most of the stuff you need but sometimes you want the easy way out!! (I couldn't find a smiley for pissed off ) you know how it gets sometimes
just having one of those days
BILLY

[parisian62]

Great - "how to" thread for rear wagon lenses. That fresh chrome looks amazing.

Smoth Customs - Will you seal between the lense and the overrider? to keep dust or water out?

Stewart

[Trev]

I made mine out of the plastic covers for a fluorescent light, they fit inside the overriders before they are bolted back on.

Must be a bugger if you blow a bulb, Trev!!!

Scotty.

How would I know, it's not something I take much notice of

[Sputzwagon]

I made mine out of the plastic covers for a fluorescent light, they fit inside the overriders before they are bolted back on.

Must be a bugger if you blow a bulb, Trev!!!

Scotty.

How would I know, it's not something I take much notice of

I like the 'cut of your jib' , Trev.

Scotty.