Stumped
Stumped
Hi, first time posting and I've just brought an EK (pics will come later) anyway Im having problems getting the clutch to engage, I can't get a gear when the motor is running (can get a gear when motor is off). So far i've tried adjusting the clutch fork, looked for a leak in the lines and bleeding. However when i bleed it, the fluid wouldn't come out with every depression of the clutch pedal and the fluid had a lot of crap in it. The actuating cylinder seems to extending out to it fullest. Hmmm any ideas
More money needed!!
Re: Stumped
Has it been sitting for a long time ? Maybe the clutch plate is frozen to the fltwheel - if it wont bleed up as you describe you may need to replace the master cylinder or maybe the hose is full of crap - try and flush the system with new fluid and see if it improves .
....... and welcome to the forum![wink :wink:](./images/smilies/Wink.png)
....... and welcome to the forum
![wink :wink:](./images/smilies/Wink.png)
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.