Wayne with a Sydney 1961 FB

[rustysdungers]

Looking awesome, Wayne.

Wish I had your garage

WHY do you want a black ek to

[Cal]

No Rusty, the actual garage

[parisian62]

You must be stoked with that Wayne.

[WayneXG95]

Milkshakes's doors open and close with no problems at all.
And we used a Rarespares rubber kit....

http://youtu.be/mEZvkZlr84c

[Cal]

The rubber at the bottom is hanging out, Wayne

[WayneXG95]

The rubber at the bottom is hanging out, Wayne

My rubber has been hanging out since I was old enough to know why.....

Really the sill plates arn't in yet ya dick!.....

[parisian62]

Milkshakes's doors open and close with no problems at all.

You showoff! I'm jealous...

[WayneXG95]

Milkshakes's doors open and close with no problems at all.

You showoff! I'm jealous...

Sounds just like a Golf.

[fingers]

Milkshake ... ........Looking good mate .......damn nice colour ........Fingers

[WayneXG95]

A bit more from today

Almost finished the sound deadner on the roof
Going to fill up the missing bits after I do the floor.







I'm over painting floors I tell ya.
Must be 3 coats of POR15 and the last today was black enamel. This FB will never rust in my lifetime.







Cheers

[baker12]

Have you tried sticking the sound mat to the POR15 how did it go?
I am doing the same to mine after I finally paint it would like to know if I need to scuff it up or not let us know how you go
I got some matting off ebay resomat got sh@tloads will be doing the roof and the floors interior side of firewall boot lid etc.

[WayneXG95]

I painted over the por15 with enamel.
Sticks like glue.
Ring me any time and have a yarn mate.

[baker12]

Thanks I will

[WayneXG95]

My firewall sound deadener arrive today, can't wait to install it.
Cost $170 from John Warren Victoria we found it in the FE FC Forum
His mobile is 0411 316 137 email john@classicgloveboxes.com



Thought I'd put the floor mats in to settle them
so out in the sun to warm them up, they need a trim but I'm not complaining.





Boot came up a treat.



Installed the rubber flappy things under the bonnet to keep the dust out
And yes I know there EK but didn't have an option, I may change them later.
Made them myself from a template I brought off ebay and the rubber from good old Clark Rubber.



You might find this interesting, I spent a good part of a week cleaning and polishing the decoration that goes
on the sill covers, that was a shit of a job put as there's no repo avaiable it had to be done (Les at Rarespares note!)
I used a hobby knife to scrape out 50 years of dirt and grine and polished with Purple Stuff.
They look great.



Before



After



Thats all Kiddies

Cheers.

[WayneXG95]

Rustydungers (Russell) Came around Saturday afternoon and put the taillights and bumpers on.....
While I watched and took piccies...
Don't you say a word Stewart....

Altho I put the new rubber dust protectors on the taillights...



Used these bolts and washers to do that..got em at bunnings!...



So I got the front one together.....



And it looks like this now.....



How good does the back look, the chrome just adds to the car...



I also put the dust protector on the rear beaver panel but didn't take pics ...sorry.