FB/EK Door card stainless trim lengths.

Includes seating, upholstery, door trims, dashboard and heater.

Moderators: reidy, Blacky

Post Reply
User avatar
stinky
Posts: 901
Joined: Tue Oct 11, 2005 10:06 pm
State: SA
Location: Willaston, South Australia

FB/EK Door card stainless trim lengths.

Post by stinky »

Tidying up my trim shop the other day I came across a bunch of FB/EK stainless, I'll assume most are anyway.
Is someone able to run a tape measure over the various trims so I can sort them out and put them up for sale?
Blacky
Posts: 12816
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: FB/EK Door card stainless trim lengths.

Post by Blacky »

Can do tonight mate.
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
funkyscooter
Posts: 581
Joined: Wed Aug 16, 2017 8:12 am
State: NSW
Location: Sydney

Re: FB/EK Door card stainless trim lengths.

Post by funkyscooter »

Is that the set up on Gumtree at the moment? I am missing some trim off my ek sedan rear door cards so I'm keen. Just not keen enough to become the proud owner of all 26 pieces. I can run a tape over what I have and let you know if Blacky doesn't beat me to it.
Scott
(Not so rusty) Ol' Rusty - FB/EK Sedan
User avatar
funkyscooter
Posts: 581
Joined: Wed Aug 16, 2017 8:12 am
State: NSW
Location: Sydney

Re: FB/EK Door card stainless trim lengths.

Post by funkyscooter »

Well my memory is shot - it’s the fronts I’m missing the top trim for.
Pictures might help my description

Front
Front.jpeg
Front.jpeg (957.29 KiB) Viewed 267 times
Rear
Rear.jpeg
Rear.jpeg (854.61 KiB) Viewed 267 times
Rear Top Back Side
Rear Top Back.jpeg
Rear Top Back.jpeg (625.42 KiB) Viewed 267 times
Rear Top Front Detail
Rear Top Front Detail.jpeg
Rear Top Front Detail.jpeg (1.03 MiB) Viewed 267 times
Rear Top Corner Detail
Rear Top Corner Detail.jpeg
Rear Top Corner Detail.jpeg (654.27 KiB) Viewed 267 times
Centre Trim Profile
Centre Profile.jpeg
Centre Profile.jpeg (524.25 KiB) Viewed 267 times
Assuming the cards I have are EK…..

Rear Top Trim 766mm x 6mm on the front, 16.5 on the back and there with a 90 degree radius at each end. Width is roughly 6mm

Rear Centre Trim - 652mm x 12mm. Radius at both ends and approximately 4-5mm high

Front Centre Trim - 415mm x 12mm. Radius at both ends and approximately 4-5mm high

Front Upper Trim - Missing. Sure someone else can help. As a rough guide, based on the indent in the vinyl on one card, it looks to be 6mm on the front and 16.5 mm on the back- same as rear cards. The trim is straight for 520mm and curves for 400mm to meet the centre trim.
Scott
(Not so rusty) Ol' Rusty - FB/EK Sedan
User avatar
stinky
Posts: 901
Joined: Tue Oct 11, 2005 10:06 pm
State: SA
Location: Willaston, South Australia

Re: FB/EK Door card stainless trim lengths.

Post by stinky »

funkyscooter wrote: Mon Nov 18, 2024 1:17 pm Is that the set up on Gumtree at the moment? I am missing some trim off my ek sedan rear door cards so I'm keen. Just not keen enough to become the proud owner of all 26 pieces. I can run a tape over what I have and let you know if Blacky doesn't beat me to it.
Not me, I'm not sure what I have at the moment.
User avatar
Harv
Posts: 5260
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: FB/EK Door card stainless trim lengths.

Post by Harv »

funkyscooter wrote: Mon Nov 18, 2024 2:23 pm Rear Top Trim 766mm x 6mm on the front, 16.5 on the back and there with a 90 degree radius at each end. Width is roughly 6mm

Rear Centre Trim - 652mm x 12mm. Radius at both ends and approximately 4-5mm high

Front Centre Trim - 415mm x 12mm. Radius at both ends and approximately 4-5mm high

Front Upper Trim - Missing. Sure someone else can help. As a rough guide, based on the indent in the vinyl on one card, it looks to be 6mm on the front and 16.5 mm on the back- same as rear cards. The trim is straight for 520mm and curves for 400mm to meet the centre trim.
Front Upper Trim: 926mm long x 9.5mm wide. Radius at trailing (horizontal run) edge, leading (vertical run) edge is open.

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
User avatar
stinky
Posts: 901
Joined: Tue Oct 11, 2005 10:06 pm
State: SA
Location: Willaston, South Australia

Re: FB/EK Door card stainless trim lengths.

Post by stinky »

Thanks everyone, anyone run a tape over their FB stainless?
Blacky
Posts: 12816
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: FB/EK Door card stainless trim lengths.

Post by Blacky »

stinky wrote: Wed Nov 20, 2024 7:19 pm Thanks everyone, anyone run a tape over their FB stainless?
Have put a reminder in my phone to do it tonight for you Stinky :thumbsup:
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
stinky
Posts: 901
Joined: Tue Oct 11, 2005 10:06 pm
State: SA
Location: Willaston, South Australia

Re: FB/EK Door card stainless trim lengths.

Post by stinky »

funkyscooter wrote: Mon Nov 18, 2024 2:23 pm Well my memory is shot - it’s the fronts I’m missing the top trim for.
I've got a pair, not sure of condition, I can send a picture if you are interested.
Blacky
Posts: 12816
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: FB/EK Door card stainless trim lengths.

Post by Blacky »

Fb front -
Image
Image

Rear
Image
Image


Sent from my iPhone using Tapatalk
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
funkyscooter
Posts: 581
Joined: Wed Aug 16, 2017 8:12 am
State: NSW
Location: Sydney

Re: FB/EK Door card stainless trim lengths.

Post by funkyscooter »

stinky wrote: Wed Nov 20, 2024 8:01 pm
funkyscooter wrote: Mon Nov 18, 2024 2:23 pm Well my memory is shot - it’s the fronts I’m missing the top trim for.
I've got a pair, not sure of condition, I can send a picture if you are interested.
Yep very keen, please send pics.
Thanks
Scott
(Not so rusty) Ol' Rusty - FB/EK Sedan
User avatar
stinky
Posts: 901
Joined: Tue Oct 11, 2005 10:06 pm
State: SA
Location: Willaston, South Australia

Re: FB/EK Door card stainless trim lengths.

Post by stinky »

Blacky wrote: Wed Nov 20, 2024 9:59 pm Rear
Image
Thanks Blacky, is that first Rear picture correct? Looks like the front card again.
Blacky
Posts: 12816
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: FB/EK Door card stainless trim lengths.

Post by Blacky »

Sorry , my bad - about 590 and 750mm for the rears mate
Image
Image


Sent from my iPhone using Tapatalk
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
Post Reply