remove and replace EK front parking light fitting

Includes sheet metal, rubbers, bumpers, badges and rust repairs.

Moderators: reidy, Blacky

Post Reply
ceej810
Posts: 19
Joined: Wed Jul 06, 2016 3:07 pm
State: NSW
Location: Brookvale

remove and replace EK front parking light fitting

Post by ceej810 »

Hi has anyone got a drawing of the blow up of the EK parking light assembly. Is it just attached to the fender and grill?
Thanks for any help.
Regards Ceej
User avatar
Harv
Posts: 5113
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: remove and replace EK front parking light fitting

Post by Harv »

They bolt onto the guard.

Work from inside the wheel well (easier with the wheel removed).

Three bolts along the top, and one at the bottom on the end of a piece of round bar.

indicator bolts.jpg
indicator bolts.jpg (91.8 KiB) Viewed 373 times

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
User avatar
Errol62
Posts: 9895
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: remove and replace EK front parking light fitting

Post by Errol62 »

There is a feller reproducing the long bottom mounting tubes. Try ebay or Facebook if you need them.

Sent from my SM-G781B using Tapatalk

getting my FB ute on the road
EK van on rotisserie
User avatar
Errol62
Posts: 9895
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: remove and replace EK front parking light fitting

Post by Errol62 »

Here is a link to the long fastener if it works, and if I’m not just talking to crickets.




FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
Post Reply