my latest mistake

Post photos of your pride and joy, or updates on your rebuild!

Moderators: reidy, Blacky

Mick
Posts: 4228
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

my latest mistake

Post by Mick »

everybody probably saw it on facebook it got the better of me and i bought it, BUT it is a real good body, front left guard is not original but has never had a repair and the rest of the van that i can see has never had a rust or damage repair and only needs very minor repairs now, the rivet counters are going to hate it because unless i find someone to give me my money back the floor hump is going in place of one big enough to fit a decent gearbox and most likely R&P steering and dual circuit brakes and of course a red 6
481187725_10236605329213602_7705902747578255903_n.jpg
481187725_10236605329213602_7705902747578255903_n.jpg (512.58 KiB) Viewed 545 times
481187725_10236605329213602_7705902747578255903_n.jpg
481187725_10236605329213602_7705902747578255903_n.jpg (512.58 KiB) Viewed 545 times
481187725_10236605329213602_7705902747578255903_n.jpg
481187725_10236605329213602_7705902747578255903_n.jpg (512.58 KiB) Viewed 545 times
481187725_10236605329213602_7705902747578255903_n.jpg
481187725_10236605329213602_7705902747578255903_n.jpg (512.58 KiB) Viewed 545 times
481187725_10236605329213602_7705902747578255903_n.jpg
481187725_10236605329213602_7705902747578255903_n.jpg (512.58 KiB) Viewed 545 times
481187725_10236605329213602_7705902747578255903_n.jpg
481187725_10236605329213602_7705902747578255903_n.jpg (512.58 KiB) Viewed 545 times
481187725_10236605329213602_7705902747578255903_n.jpg
481187725_10236605329213602_7705902747578255903_n.jpg (512.58 KiB) Viewed 545 times
Attachments
474610476_1294639291818798_7535535928169187158_n.jpg
474610476_1294639291818798_7535535928169187158_n.jpg (148.79 KiB) Viewed 545 times
941db41f-6e54-4da2-a0b4-c41755c366a7.jpg
941db41f-6e54-4da2-a0b4-c41755c366a7.jpg (340.36 KiB) Viewed 545 times
480952340_10236605331853668_4711221177119510332_n.jpg
480952340_10236605331853668_4711221177119510332_n.jpg (708.3 KiB) Viewed 545 times
481055307_10236605330973646_4910091157228247862_n.jpg
481055307_10236605330973646_4910091157228247862_n.jpg (376.36 KiB) Viewed 545 times
481272935_10236605330333630_1808032870049506076_n.jpg
481272935_10236605330333630_1808032870049506076_n.jpg (548.47 KiB) Viewed 545 times
481042846_10236605328253578_3981952010051881029_n.jpg
481042846_10236605328253578_3981952010051881029_n.jpg (554.01 KiB) Viewed 545 times
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Mick
Posts: 4228
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: my latest mistake

Post by Mick »

i have no clue what happened there why it posted the first pic 6 times :crazy: and the next lot of pics aren't in the order i placed them :think:
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Blacky
Posts: 13051
Joined: Tue Jul 20, 2004 8:58 am
State: WA
Location: up in the Perth hills

Re: my latest mistake

Post by Blacky »

so whats the deal with the side Mick ? has it got a panel screwed over window holes ???
I started with nothing and still have most of it left.


Foundation member #61 of FB/EK Holden club of W.A.
User avatar
Errol62
Posts: 10586
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: my latest mistake

Post by Errol62 »

You bastard! Where do you find all these good projects?


Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
User avatar
FireKraka
Posts: 2545
Joined: Fri Jan 24, 2014 11:12 am
State: WA
Location: Serpentine, WA

Re: my latest mistake

Post by FireKraka »

Wow Mick that is a pretty tidy body well done. :thumbsup:
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
User avatar
FireKraka
Posts: 2545
Joined: Fri Jan 24, 2014 11:12 am
State: WA
Location: Serpentine, WA

Re: my latest mistake

Post by FireKraka »

Come on Clay when are you going to get back onto your wagon mate
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
BS
Posts: 442
Joined: Thu Jul 31, 2008 8:31 pm
State: NOT ENTERED
Location: Brisbane

Re: my latest mistake

Post by BS »

Looking forward to watching the latest ratbox special progress. Looks like a good rig.


Sent from my iPhone using Tapatalk
Mick
Posts: 4228
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: my latest mistake

Post by Mick »

Blacky wrote: Thu Feb 27, 2025 12:02 am so whats the deal with the side Mick ? has it got a panel screwed over window holes ???
yeah it was had long oval windows at some point, on the left side it's been panel glued, i'm in 2 minds as i don't mind side windows especially when it's one long window whether to leave them or put windows back in, i'm leaning towards leaving them
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Mick
Posts: 4228
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: my latest mistake

Post by Mick »

Errol62 wrote: Thu Feb 27, 2025 10:45 am You bastard! Where do you find all these good projects?


Sent from my iPhone using Tapatalk
i actually tried my hardest not to buy it, it was on a few pages and marketplace on facebook, the day i bought it i was just about to book a flight to Sydney to buy a chev pickup (on second thoughts i wish i booked that flight) when i got a text from the guy i use to transport cars asking did i want that van picked up and spur of the moment i said yes and then paid for the van
like most things now i have it i don't particularly want it :crazy: :roll:
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Mick
Posts: 4228
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: my latest mistake

Post by Mick »

FireKraka wrote: Thu Feb 27, 2025 10:55 am Wow Mick that is a pretty tidy body well done. :thumbsup:
it really is, it's far to good for me :lol: inside appears to be all original paint and in fairly good condition and outside i have no idea why they stripped the paint but there's been no repairs for rust or damage and only appears the only odd panel is the left front guard and that even seems to be extraordinarily good, it does need a couple of very minor rust repairs
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
Mick
Posts: 4228
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: my latest mistake

Post by Mick »

Mick wrote: Thu Feb 27, 2025 9:12 pm
FireKraka wrote: Thu Feb 27, 2025 10:55 am Wow Mick that is a pretty tidy body well done. :thumbsup:
it really is, it's far to good for me :lol: inside appears to be all original paint and in fairly good condition and outside i have no idea why they stripped the paint but there's been no repairs for rust or damage and only appears the only odd panel is the left front guard and that even seems to be extraordinarily good, it does need a couple of very minor rust repairs
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
In the Shed
Posts: 2047
Joined: Wed May 16, 2012 10:18 pm
State: SA
Location: South Australia

Re: my latest mistake

Post by In the Shed »

That should keep you busy Mick. Does it have a motor/ gearbox? What driveline are you thinking?

Interested in seeing how this one unfolds.

Regards
Stephen
A day in the shed beats a day at work!
EK283
Posts: 2451
Joined: Thu Mar 16, 2006 9:51 pm
State: NSW
Location: SYDNEY NSW

Re: my latest mistake

Post by EK283 »

Hey Mick,

Im interested, PM me a price please.

Greg
So many cars so little time!
Mick
Posts: 4228
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: my latest mistake

Post by Mick »

In the Shed wrote: Thu Feb 27, 2025 11:05 pm That should keep you busy Mick. Does it have a motor/ gearbox? What driveline are you thinking?

Interested in seeing how this one unfolds.

Regards
Stephen
don't want to get involved with engineers so won't be anything crazy try and keep it simple but try fly under the radar a bit 149 red, if i cut the floor just a trimatic though i don't particularly want to cut the floor (can't believe i just typed that) so would like a red crash box with EJ/EH column and have 3 speed column change, disc front and get it as low as i can and a rough coat of the original wedgewood blue
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
User avatar
Errol62
Posts: 10586
Joined: Sat Dec 06, 2014 2:44 pm
State: SA
Location: Adelaide

Re: my latest mistake

Post by Errol62 »

I fitted 179 and all synchro in my ute without cutting the floor, well hardly, apart from massaging for the side cover and reshaping the inspection cover. It did require converting the column shift. That was after blowing up the crashie at Balina. I think you would remember that. Having said, crashbox will do the job behind the 149 no problem.


Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
Post Reply