You are right 6 of them at the moment and not one of them goes ..........
FB ute
Re: FB ute
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: FB ute
I have a nice rotating shortie if you need it. Harv got the lifters out of it. Get the thing out of my sight…
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: FB ute
It is even FB era correct
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: FB ute
Sounds promissing that offer !
30 thou undersize, bit on the limit with the crank.
Block definately in the bin !!!!
Greg
30 thou undersize, bit on the limit with the crank.
Block definately in the bin !!!!
Greg
So many cars so little time!
Re: FB ute
I can lend you another set of spark plugs if that helps.
Re: FB ute
Must have been a lifter famine at some stage. Of the half dozen or so blocks I pulled down looking for a crank, very few had lifters left in them.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
-
- Posts: 1983
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: FB ute
A guy contacted me after lifters to put in a BMC Mini Minor. Back in the day, they used to bore the mini engines to take the grey lifters.
A mate runs &*#@ lifters in his 202, again bored out to suit. Maybe find something oversize to fit the grey?
Sent from my SM-G781B using Tapatalk
A mate runs &*#@ lifters in his 202, again bored out to suit. Maybe find something oversize to fit the grey?
Sent from my SM-G781B using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: FB ute
302 lifters are the right diameter, but are HEAVY.
Doesn’t seem to be any signs of pinging. Any chance that the top ring had lost all gap and was pushing on that crown land?
Cheers,
Harv
Doesn’t seem to be any signs of pinging. Any chance that the top ring had lost all gap and was pushing on that crown land?
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: FB ute
That's what Craig Allardyce said - when I drained the coolant out of the block it was green but when I siphoned the last of it out of the back of the block before removing it from the car it was like swamp mud , he reckons the blocks fill up with shit around the back pot , they overheat, the top ring expands and closes up then we all know what happens then .........
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: FB ute
Found the rest of the top ring last night - in the bottom of the sump …….
Hoping pumping all that crap around hasn’t destroyed the oil pump , will blow it apart and have a look at it this weekend
Sent from my iPhone using Tapatalk
Hoping pumping all that crap around hasn’t destroyed the oil pump , will blow it apart and have a look at it this weekend
Sent from my iPhone using Tapatalk
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: FB ute
“Top ring in the bottom of the sump…..”
My godfather!?
FB ute fixer upper, EK van on rotisserie
My godfather!?
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: FB ute
Hey Blacky maybe you need that engine that Brett27 has shown a couple of times
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Frankenstein EK V6 Ute
The Reverend FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Re: FB ute
It sure is purty but I have one half done in the shed
I started with nothing and still have most of it left.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: FB ute
Finding that missing bit in the sump as glitter is bad enough, finding it whole would have been worse.
I lost a gudgeon pin clip once in a Mini engine. It went down between the bore and piston. Incredible carnage for a few milliseconds.
Cheers,
Harv
I lost a gudgeon pin clip once in a Mini engine. It went down between the bore and piston. Incredible carnage for a few milliseconds.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.