fbekholden.com

That's reasonable for sure but the round ends are more the period. Could always turn down some square ones and buff them up Harv.


Sent from my iPhone using Tapatalk

Probably common with local Vals etc of the era. Trico or someone like that?


Sent from my iPhone using Tapatalk

You'll notice an improvement Rowan?


Sent from my iPhone using Tapatalk

Looms from EK special, standard and van and FB standard. All the wire is brittle and oxidised.


Sent from my iPhone using Tapatalk

May be interested in carbs Trev. Probably running 12 port.


Sent from my iPhone using Tapatalk

I just want 3!


Sent from my iPhone using Tapatalk

http://uploads.tapatalk-cdn.com/20160730/3ee016a76f5766cbca0d570edd9b05b1.jpg

Later type has a flat head? http://uploads.tapatalk-cdn.com/20160730/ca77cadfc6bd368e2a473c97c376d3cc.jpg

I should have some here but can't find a matching pair. Can't even find the ones out of my 215 sedan, retro ...

There might be a pair in here somewhere


Sent from my iPhone using Tapatalk

Yes the FB ones. Not nearly as common.

You should be able to get a pair of the EK ones off a HQ-J-X-Z at the local wreckers for a few bills.


Sent from my iPhone using Tapatalk

The pivot bush and pin are usually the culprit and are universal fitment FE to HR. Cheap easy fix last time I did one which is 20 years ago.


Sent from my iPhone using Tapatalk

Common fit EK to HZ at least for the smaller ones. Never paid for one as they are generally prolific in the wrecking yards I have been known to frequent. A bit of a rub with emery paper and splice in to loom.

I remember my mate had fitted pivoting arms with self tappers to his HR wagon. These ...

Recon we've seen worse but more accessible cases than that wagon listed for sale as resto projects on eBay and gumtree Rosco. Gotta love the bush.


Sent from my iPhone using Tapatalk

I would talk to a wheel and rim works and see if they can make up rims to take your original centres. HK 14" rims won't the original caps.


Sent from my iPhone using Tapatalk

I've hit a couple in my sedan. Bent a few bits and flat spotted front tyres but not a stopper. Different story to when I hit one in an XF. Flattened everything against the block and pushed the water pump shaft on so the impeller left scores on the front outer cylinder casting. With the EK it was ...

Yeah no switches fitted. Just the holes. Now my "EK" van will be a real bitsa...... FC firewall etc. I noticed the heater hole is in a different spot and the regulator mount surface has raised flutes. Implications for fitting the warmaride and repro factory firewall insulation. Could also be an ...