Search found 332 matches
Re: LS1EK
Christ, am I just lucky or are all doors gaps as bad as mine along the bottom. I have the gaps pretty good along the top areas but along the bottoms at the rocker that are so far out. I know I was going to have to doing some sanding and add some metal but wow, they are pretty bad. The last picture s...
Re: LS1EK
Just need to get the rubber to attach it to the throttle body plus a couple of fixings so it stays on the right spot.
Re: LS1EK
So, back at it and have fabbed up the air filter housing, there was not way I was going to stick a pod filter on it.
Once finished it will hopefully look as it was fitted
In the factory.
Once finished it will hopefully look as it was fitted
In the factory.
Re: LS1EK
Washer bottle
Re: LS1EK
Battery tray mounted, fuel cap and filler sorted but need to do a breather, now to mount the radiator overflow tank and fabricate up a washer bottle tank.
Also fitted new door hinge pins and bushes.
Also fitted new door hinge pins and bushes.
Re: LS1EK
Fuel tank , another job off the list.
Re: LS1EK
Chipping away, pipes made up to go from the under dash brake master cylinder to the upper fill point that is mounted where the speaker would normally reside. Also in the process of installing the fuel cap and filler pipe to the fuel tank.
Re: LS1EK
I purchased them from here https://www.partsforhotrods.com.au/ but I know you can get the accelerometer and cable on eBay.
Cheers, Simon
Re: LS1EK
More little jobs ticked off. Heater in let and outlets done as well as mount for the fuel sender.
Re: LS1EK
No, just a cheap one from one of the local rod shop suppliers. Ebay have them with the cable as well
Re: LS1EK
Well got a couple of hours free to set up the accelerator pedal and cable today. Bit of buggering around but got there in the end. Still need to clean up the bracket and add a mount for the cable but it all works.
Re: LS1EK
Not wrong Blacky, and to think what you see here is progress