fbekholden.com

G'day,

Checked out a couple of wrecks earlier in the week I have been meaning to investigate for a while, found this FB that is all Blue. I was in a bit of a hurry so didn't get a photo of the ID plate but interesting, what do you reckon the colour would be? Al
[image]https://i.imgur.com/xtvgh1Gl ...

Thanks for your help Rob. Al

G'day,

Anyone recognize this linkage? In a pile of parts I have. Al

[image][/image]
[image][/image]

G'day,

Sorry for the delay in following this up. Still no good, I did pull start it the other day; it was very reluctant to start but would run ok once it spluttered a bit and I got the revs up. With less than half the pedal (half revs) it will slowly die but will rev up quite well when revved a ...

Thanks fellas, all good advice. The poor old thing is too far gone to do anything with as really rusty but functional. Rusted through on the roof in a number of spots, firewall and scuttle completely rooted, floors, pillars - all the usual suspects. It is stored in a shed so won't deteriorate any ...

G'day,

I need some help with the 138 in my sons paddock bomb EJ. It stopped the other day with no spark, I have changed coil, coil lead, had the distributor apart and cleaned all the contacts up, checked timing, checked fuel and all good. It now has spark but wont run. If I sneak up on it in the ...

Thanks Tim, I will check it against a HR sedan and see how it looks. Any other ideas??? Al

G'day, I picked up this rear venetian shade recently but cant work out what it fits. I hoped it was EH sedan as the family had one in the past but it is not tall enough vertically, but is about right for width and curvature. Measures about 1220mm in width and 360mm in height, with a concave curve to ...

G'day all, found another one on the weekend, haven't seen this kit before, what is it called Sunnytim?

And no it is not for sale as I haven't even asked the bloke if he wants to sell it, the type of bloke that never sells much.

Al

Quick question, are FE FC NASCO external sun shades/visors the same for sedans and commercials? I know they are different for FB Ek, same story for FE FC?? Al

G'day All,

I got it to work today after taking the original low horn off and cleaning the terminals, all fixed. Funny how problems are usually fixed by the simplest things in the end, seem to over think things a bit....

Looks pretty don't you reckon and sounds pretty cool. Thanks for you ideas and ...

Thanks for your responses. Clay, I reckon I have it wired in parallel; one wire to each of the two double terminals on the back of the standard horn from the loom and then one wire (two wires total) from each double terminal to the single terminals on the back of the hi horn (as same as first photo ...

G'day all,

I got lucky last Friday and picked up a correct FB EK hi note horn in a box of horns at the Ballarat Swap ($5; pretty happy with myself). I tried to connect it up yesterday and cant get it to work proper so thought some one here may be able to help out.
When I connect Hi horn directly ...