fbekholden.com

Good stuff Steve.

Can someone offer some advice on No.8, Front Box section (where sils meet with lower Sub K Frame).

Some extra pics, advice...

Cheers, POPOK

ekstevo wrote:torana stubbs on a hr front end ?
....
or use hr stubbs I believe (or have been told lots) that torana stubbs on a hr front end will suffer from bump-steer

Thanks Stevo, the bump steer thing was what I was wondering.

Cheers,

POPOK

Thanks for the replies! Bat, what, F^%d parts??? Ok will look into the wreckers, any other solutions for tie rod ends? With the VN/VS column, do you have pics of the mounts, joints, etc? Harry, I've got the LX gear from a mate due to a favour. I have LX rims, the 3.08 ratio fine spline diff too, hen...

Hi all, I have got my hands on a HR front end, LX discs, LX stubs, 1984 commodore rack (already shortended) and LX rims. I also have an LX drum rear diff. if my questions have been addressed elsewhere, could you please offer some help with finding the thread(s). SO, my questions so far are as follow...

RobinGi wrote:I made mine from these plans
http://www.mts.net/~hpokrant/Restoratio ... sserie.htm

very happy with the results & cost about $300 all up.

Thanks RobinGi,

I'll look into the materials and instructions.

Cheers,

POPOK

Hi all,

I've got the ute, and am now looking to start on the cancer removal.

Does anyone have a rotisserie to sell in SE QLD, or plans so that I can build one?

Cheers,

POPOK

sorry to sound like a complete knob, but which mirrors should i be looking for, as im on the rare spares site ( http://www.rarespares.net.au/rarespares/SearchPage.aspx?type=partsfinder&pno=0&brand=HOLDEN&model=FB+EK&car=11C&productgroup=EXTERIOR ) and I'm seeing Straight arms, r...

Fud wrote:no, it is alot taller to my understanding, the ute one is wider and flatter

Thanks mate, had a wreckers trying to tell me they were the same, he was parting a car, I need a tank... It can wait. I need to get the rest of the body right first.

Cheers,

POPOK

Hi my name is frazer and i am doing up a 62 ek ute. i need a petrol tank because the panel beater pulled it out and saw a little bit of surface rust and decided that it was no good so he chucked it out, now i am on a mission to find a petrol tank and i was wondering a couple of things: 1 Is the sed...

Thanks Harv, Good input to the discussion. Since it's a ute, the 2-seater issue isn't a problem for me, and the mounts for the shoulder straps could go into the rear wall of the cab -- reinforced somehow -- or into the parcel shelf. I agree, a discussion would be required with the certifier, and you...

Are 4-point harnesses ADR approved? I would think they are better restraints than 3-point ones.

I am considering this option as a way of avoiding the B pillar entirely.

Cheers,

POPOK

Trev wrote:It doesn't quite beat number 88 or 4.

You're right Trev, but is is mine Just gotta cut the rust out, fix the wiring, find some panels, trim parts, brake parts, more rust, fix the ute bed, find more parts and cut out the rust....

Oh, what have I done....

Cheers,

POPOK

Thanks Steve.

I saw the spreadsheet on page 36 of this thread, it appears then that this may be the smallest Melbourne body number on file?

Cheers,

POPOK

Plate photos. Sorry, I didnt get chassis or engine id's. Will do next time I see the car. Could you please idntify trim and paint? Cheers, POPOK http://i250.photobucket.com/albums/gg265/D_photobucket/1962%20EK/100_0864.jpg http://i250.photobucket.com/albums/gg265/D_photobucket/1962%20EK/100_0865.jp...

Shannons are part of the Suncorp brand. NRMA and RACV are not the same. Since NRMA was privatised (thanks Dawn Fraser) thier poicies are geared towards the shareholder's not the members. RACQ are 50/50 (i think) club and GIO. My car and house are/were with them, but since the floods up here in Jan, ...