fbekholden.com

Hi Mark ,are stirkers the 2 sliders that attach to top of upper door and body. Cheers wayne.

Hi fingers, good will go that way. Many thanks wayne.

Thanks for your reply fingers, I made spring mounts on volvo diff. When ground to sit on diff they sit down 2/1/2" which make rear spring hangers sit forword about 15% so if I can push hanger back past vertical will be good. So do I use the HR front steel/rubber mounts or FB/EK rubbers. Many thanks ...

Hi guys, when fitting hr leaf springs to fb do you use the rubber steel tube hr bush in front eye. Or fb standed rubber ones. Many thanks wayne.

Hi adsman, yes I have ute seat out of FB,black good condition $80 I am in collie, if interested phone 041 9966 381. cheers wayne

Hi wayneXG95,Have complete grey motor fan to clutch starter,generator very good condition took out of FB went to 186 red.

Hi trev, Thanks for your reply. Yes it,s the crank , I was thinking it might have some numbers on crank hub flywheel end. Many thanks. Wayne

Hi all need some help please, Am buying 186 suposingly has steel crankshaft out of 179. Is there any way to tell with out removing sump. Has no flywheel or harmonic balancer on at the moment. Many thanks Superstock.(Wayne)

Hi Robbyrr, Thanks very much for your reply. Cheers Wayne(Superstock)

front valance that runs between front gards just under indicators. Mine have 8 holes that run across is this FB or EK many thanks Wayne.

Hi Gareth, have been trying tolog on since last saturday but could not remember my password. any how I fitted hq radiator in my FB 2 months ago & used HT/G top hose. Cut about 25mm off radiator end. hope this helps cheers wayne

Hi Dave68,About 8 years ago cut 2 large home gas bottles in half to use domed ends for large compressor tank. This method works well with fuel tanks to that have just been emptyed. flush with water 5 min empty out connect vacum cleaner size hose to exhaust of another car insert into tank you wont to ...

Hi Ben, thanks for that info, will order POR15 today, Many thanks to Lexumus & you to Ben.

Lexumus,Is that product on the inside of tank as well. It's not POR15 by any chance. At first look it looked like galvernized, Or if only on out side hammer finish. Many Thanks Wayne.

Hi Lexumus, That looks better than a new tank. Looks like it has been galvernized. Will see what place in perth or bunbury do that sort of thing. Many thanks Wayne.