Trimatic to Grey Motor Conversions
Re: Trimatic to Grey Motor Conversions
okie dokie. well i'm pretty confident i've got my head around it now.
-trimatic with drivers side linkages (pref with 360 bellhousing)
-if not, have a trans shop fit the 360 bellhousing for me as they're hard to line up properly
-use the conversion kit from Rodger on ebay (mine has the redrilled flex plate included)
-rear gearbox mount not necessary (spose i can put one in later if i feel the need)
-LJ tailshaft, or have an LH or EK one shortened.
-plumb vacuum lines
-use hydramatic 'box mounts which may need a bit of grinding to clear bellhousing bolts
and the last step...throw it all out and get a 327
thanks dave, RB, Trev, Doug, FB Mad and everyone else who's contributed to this thread-hopefully i'll get the bits together soon and put up lots of photos of the process
-trimatic with drivers side linkages (pref with 360 bellhousing)
-if not, have a trans shop fit the 360 bellhousing for me as they're hard to line up properly
-use the conversion kit from Rodger on ebay (mine has the redrilled flex plate included)
-rear gearbox mount not necessary (spose i can put one in later if i feel the need)
-LJ tailshaft, or have an LH or EK one shortened.
-plumb vacuum lines
-use hydramatic 'box mounts which may need a bit of grinding to clear bellhousing bolts
and the last step...throw it all out and get a 327
thanks dave, RB, Trev, Doug, FB Mad and everyone else who's contributed to this thread-hopefully i'll get the bits together soon and put up lots of photos of the process
'The best engine in the world is a vagina. It can be started with only one finger. It is self-lubricating. It takes any size piston. And it changes it's own oil every four weeks. It is a pity that the management system is so f*$king temperamental.'
- JOD34N
- Posts: 32
- Joined: Tue Apr 22, 2008 5:12 pm
- State: NOT ENTERED
- Location: Casino N.S.W
- Contact:
Re: Trimatic to Grey Motor Conversions
Does anyone have contact details for Rodger??
looked on ebay & no kits listed, I am thinking about doing this conversion.
Thanks,
Dean.
looked on ebay & no kits listed, I am thinking about doing this conversion.
Thanks,
Dean.
I shoot little furry animals with a big Canon!!
Re: Trimatic to Grey Motor Conversions
PM sent Dean.
[img]http://i47.photobucket.com/albums/f177/trevwood/WOOFTOsmall.jpg[/img]
Woofto Car Club Member No3
Woofto Car Club Member No3
- JOD34N
- Posts: 32
- Joined: Tue Apr 22, 2008 5:12 pm
- State: NOT ENTERED
- Location: Casino N.S.W
- Contact:
Re: Trimatic to Grey Motor Conversions
Thanks trev,
Appreciated.
Dean.
Appreciated.
Dean.
I shoot little furry animals with a big Canon!!
Re: Trimatic to Grey Motor Conversions
Hi Guys,
Got my kit last night and going through the instructions i see the vac line plumbed to the manifold.
How have you guys with Brake boosters set up both?.
Can you post some pics please.
Edo
Got my kit last night and going through the instructions i see the vac line plumbed to the manifold.
How have you guys with Brake boosters set up both?.
Can you post some pics please.
Edo
One Day Hopefully!!
Re: Trimatic to Grey Motor Conversions
put a tee in the line to run both
Re: Trimatic to Grey Motor Conversions
That will work. Otherwise you will need to tap an additional port in the manifold or depending on carb setup you may be able to use a port on the base plate as manifold vacuum can be obtained anywhere between intake port and throttle butterfly.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Trimatic to Grey Motor Conversions
This looks like it will fit without too much fuss
Re: Trimatic to Grey Motor Conversions
I found that the upper holes on either side accept the Hydramatic gate bolts, so just added a pair of tee screws for the bottom two holes. HJ donor.
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: Trimatic to Grey Motor Conversions
Neutral safety switch bolts up from memory. Just make up a key which bolts to the shift arm.
HD HR Powerglide quadrant fits in the frame with minor modification, giving correct shift pattern. John Rayner at Lismore has a few as I recently bought one on gumtree.
FB ute fixer upper, EK van on rotisserie
HD HR Powerglide quadrant fits in the frame with minor modification, giving correct shift pattern. John Rayner at Lismore has a few as I recently bought one on gumtree.
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie