licence plate lights
licence plate lights
i'm still trying to visualise the fitting needed to fit the globes into my number plate lights . i bought new ones but they don't have the fittings.has anyone got a photo or a part number . any help will do.
BUILT NOT BOUGHT
Re: licence plate lights
Dave,
Photos of the FB/EK sedan assembly below - excuse my crappy photography
Big cutoff black wire is positive, connects to the rear wiring loom. Small black wire with the brass ring provides the earth connection back through the bumper bar. I can dig you out the original parts numbers if you need em, though there is around a dozen parts and the descriptions are verbose.
Cheers,
Harv.
Photos of the FB/EK sedan assembly below - excuse my crappy photography
Big cutoff black wire is positive, connects to the rear wiring loom. Small black wire with the brass ring provides the earth connection back through the bumper bar. I can dig you out the original parts numbers if you need em, though there is around a dozen parts and the descriptions are verbose.
Cheers,
Harv.
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: licence plate lights
So when you pay the 80 odd bucks for the Rare's ones, what do you actually get?
Re: licence plate lights
According to the Rares site, $88 buys you this:
Looks like the lamp holders and pig-tails are not included.
Cheers,
Harv
Looks like the lamp holders and pig-tails are not included.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: licence plate lights
yeah thats what happens you get the plastic lenses with the metal ring that the globe holder pushes into and the steel earth strap. problem is i think the guy who owned my car previously used an aftermarket one.the globe holders arn't on the loom. the photos will really help me ,so thanks at least i know what im looking for.
BUILT NOT BOUGHT
Re: licence plate lights
Dave,
From memory, the globe holders are the same ones as the gauge cluster lamps (I could be wrong though) - if someone has an old harness, they may not have the license plate lamps but will probably have 1/2 a dozen gauge lamps hanging off the spaghetti.
Cheers,
Harv.
From memory, the globe holders are the same ones as the gauge cluster lamps (I could be wrong though) - if someone has an old harness, they may not have the license plate lamps but will probably have 1/2 a dozen gauge lamps hanging off the spaghetti.
Cheers,
Harv.
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
-
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: licence plate lights
Good post!
I’ll be scavenging an old harness to see if I can find some globe holders in the dash area for the rear number plate lights
I’ll be scavenging an old harness to see if I can find some globe holders in the dash area for the rear number plate lights
Drew
Re: licence plate lights
If you get stuck for some, let me know. I've go a mangy old harness here that has made several sacrifices. Happy to cut a couple of dash globe holders off and mail to you.
Cheers,
Harv
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: licence plate lights
someone should buy classic plastic already so there is an alternative, they were only 20 bucks
Re: licence plate lights
Yes I can prolly help out too Drew bit closer to home. Same ones used to illuminate the number plate in the commercial spare wheel door if I'm not mistook.
Sent from my SM-G781B using Tapatalk
Sent from my SM-G781B using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
-
- Posts: 1891
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: licence plate lights
The pics of the lenses look like the sedan, Drew has a wagon. I thought the lenses and maybe globe holders are different?
Stephen
Stephen
A day in the shed beats a day at work!
Re: licence plate lights
most ppl use an old compact disc case...remember them...
-
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: licence plate lights
Thanks fellas for offering the assistance but I found a good stash on the carton of beer car!
Beauty!
Beauty!
- Attachments
-
- 286322ED-586A-4C92-8CC0-264E4850A6C8.jpeg (106.9 KiB) Viewed 620 times
Drew
-
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: licence plate lights
Same glove holders with different lenses I think Stephen!In the Shed wrote: ↑Wed Mar 16, 2022 6:50 pm The pics of the lenses look like the sedan, Drew has a wagon. I thought the lenses and maybe globe holders are different?
Stephen
Could be wrong though.
Drew
Re: licence plate lights
Would a cassette case do??? Cos I got a few….gpi wrote:most ppl use an old compact disc case...remember them...
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie