Blackys Bench Bucket bracket bodging blatherings
Re: Blackys Bench Bucket bracket bodging blatherings
Then I grabbed a piece of 100 x 6 flat bar to use for the bracket, had to make it 60mm wide through the base of the seat so I fired up the rotary plasma cutter and knifed the sides down - that’s that bit done, tomorrow will mount the console and paint it hopefully
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
Got the rest of it sorted today, but ran out of hifill primer - my panel beating skills or lack thereof means hifill gets used a LOT In my shed ……
Who would have thought a beer can was the perfect size to rub out the scallops on an FB seat side
all primed up with etch
Insert and cup holders done
Sent from my iPhone using Tapatalk
Who would have thought a beer can was the perfect size to rub out the scallops on an FB seat side
all primed up with etch
Insert and cup holders done
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
Flash as
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Blackys Bench Bucket bracket bodging blatherings
How much for the 2 door ??????
Greg
Greg
So many cars so little time!
Re: Blackys Bench Bucket bracket bodging blatherings
That console looks awesome.
Pretty sure the bush chook will work as rust convertor... does a good job of pickling things
Cheers,
Harv
Pretty sure the bush chook will work as rust convertor... does a good job of pickling things
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Re: Blackys Bench Bucket bracket bodging blatherings
It certainly does Harv
Painted the console - and some of the floor , bloody spray gun decided to crap out on me after I had mixed the last bit of Banff blue I had
Varnished the insert
And fixed my beeroplane
Time for a sherbet
Sent from my iPhone using Tapatalk
Painted the console - and some of the floor , bloody spray gun decided to crap out on me after I had mixed the last bit of Banff blue I had
Varnished the insert
And fixed my beeroplane
Time for a sherbet
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
does it mount to the 100x6?
Re: Blackys Bench Bucket bracket bodging blatherings
Remove the cup holders and there is a strip of flat bar that screws to the 100x6
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
-
- Posts: 1894
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: Blackys Bench Bucket bracket bodging blatherings
Nice work
A day in the shed beats a day at work!
Re: Blackys Bench Bucket bracket bodging blatherings
Looks good Blacky
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Re: Blackys Bench Bucket bracket bodging blatherings
In the photos it does, not so good up close
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
Seat is trimmed , going in tonight
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: Blackys Bench Bucket bracket bodging blatherings
Good timing seeing you’ll be sitting your arses in it for a few thousand km soon. Looks great. Style and comfort.
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
-
- Posts: 790
- Joined: Thu Jul 02, 2020 3:04 am
- State: SA
Re: Blackys Bench Bucket bracket bodging blatherings
Old seat out - oops moment - forgot about the bit that sits under the back window- found some Masonite in the shed , cut a piece to fit then off over to Drews to cover it in black marine carpet - will do for now but will redo it in blue later - also going to fill the seatbelt holes in the seat which got forgotten this time round.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.