Gear box help.

Includes clutch, transmission, propeller shaft,
universal joints, differential and rear axle.

Moderators: reidy, Blacky

Post Reply
lytec
Posts: 6
Joined: Wed Apr 18, 2012 9:47 pm
State: NOT ENTERED
Location: Gosnells

Gear box help.

Post by lytec »

Hello all. I am a couple of months away from putting this red motor and box into my E series. Can anyone identify the box at all?
box 1b.jpg
box 1b.jpg (595.46 KiB) Viewed 481 times
User avatar
Harv
Posts: 5020
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: Gear box help.

Post by Harv »

Start here:

http://www.fbekholden.com/forum/viewtop ... 26&t=18606

Give me a yell if you can’t access the Guide from Sribd and I’ll email you the sections you need.

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
lytec
Posts: 6
Joined: Wed Apr 18, 2012 9:47 pm
State: NOT ENTERED
Location: Gosnells

Re: Gear box help.

Post by lytec »

Thanks for the speedy response. I cant access that guide. I just looked at it again and noticed the slave cylinder goes straight into the left side of the bell housing.
lytec
Posts: 6
Joined: Wed Apr 18, 2012 9:47 pm
State: NOT ENTERED
Location: Gosnells

Re: Gear box help.

Post by lytec »

my email is lytec1@hotmail.com
User avatar
Harv
Posts: 5020
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: Gear box help.

Post by Harv »

You got mail. :mrgreen:

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
ardiesse
Posts: 1074
Joined: Thu Jan 19, 2017 9:57 am
State: NSW
Location: Sydney

Re: Gear box help.

Post by ardiesse »

It's a late EH - early HK "crashbox". It looks to have the linkages from a Speco or similar floor-shifter.

Rob
lytec
Posts: 6
Joined: Wed Apr 18, 2012 9:47 pm
State: NOT ENTERED
Location: Gosnells

Re: Gear box help.

Post by lytec »

Thanks for the email Harv. Much appreciated. I was able to identify the box.
Post Reply