Glass polishing

If it doesn't fit below then post here and see if another FB EK fanatic can help you out.

Moderators: reidy, Blacky

Post Reply
EK283
Posts: 2342
Joined: Thu Mar 16, 2006 9:51 pm
State: NSW
Location: SYDNEY NSW

Glass polishing

Post by EK283 »

Hi Guys,

Anyone know who could polish toughened glass in Sydney ?

Greg
So many cars so little time!
Top
User avatar
Harv
Posts: 5090
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: Glass polishing

Post by Harv »

Not sure if it helps, but I DIY'd the windows in the wagon. They were not too badly scratched though. Cleaned the muck off them, then hit them with cutting compound on the 9" buff. Came out pretty good, with no "swirleys" visible in afternoon sunlight.

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Top
User avatar
Wrongway Roger
Posts: 709
Joined: Fri Jun 20, 2014 7:06 pm
State: SA
Location: Adelaide

Re: Glass polishing

Post by Wrongway Roger »

Hi Greg,
I know some on the forum has polished their glass using cerium oxide.

Aussie Sapphire are in GLEN INNES, NSW.
https://www.aussiesapphire.com.au/glass ... ring-glass

Maybe worth a look.

Cheers,Roger
There is a right way and a wrong way and then there is my way which is usually the long way.
Top
User avatar
Harv
Posts: 5090
Joined: Mon Oct 08, 2007 2:00 pm
State: NSW
Location: Sydney, Australia

Re: Glass polishing

Post by Harv »

Have you tried Ralph Moore?
http://ralphmooreautoglass.com.au/services/

Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
Top
Post Reply

Return to “General sharing advice and experience”