wipr arm length
wipr arm length
Can someone help me with the correct length of the wiper arms for the FB EK please? Cheers, Fraze
Re: wipr arm length
Where is my wiper stash??
Sent from my SM-A705YN using Tapatalk
Sent from my SM-A705YN using Tapatalk
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
Re: wipr arm length
Thanks for that Clay, however it is the arm length I am after, not the blade as shown. Have a great New Year! Cheers, Fraze
Re: wipr arm length
Can’t find my arms fraze sorry. Happy New Year mate
FB ute fixer upper, EK van on rotisserie
FB ute fixer upper, EK van on rotisserie
getting my FB ute on the road
EK van on rotisserie
EK van on rotisserie
-
- Posts: 1881
- Joined: Wed May 16, 2012 10:18 pm
- State: SA
- Location: South Australia
Re: wipr arm length
Hey Fraze
This what you are after? These are off the EK Ute Clay and I scrounged bits from. Top arm is 408mm and bottom 480mm (straight line), both measurements pin/pivot to pin. Hope this helps and Clay finds his arms to get that Ute painted!
Regards
Stephen
This what you are after? These are off the EK Ute Clay and I scrounged bits from. Top arm is 408mm and bottom 480mm (straight line), both measurements pin/pivot to pin. Hope this helps and Clay finds his arms to get that Ute painted!
Regards
Stephen
- Attachments
-
- BEB2BCDD-0371-41A4-B6FF-DDA8FC3A5449.jpeg (454.04 KiB) Viewed 663 times
A day in the shed beats a day at work!
Re: wipr arm length
Thanks for all the tries guys. What I am after is the length of the arm that holds the blade. (The blade being the part in Clay's photo). This arm pushes onto the spindle which is just below the windscreen. My problem is that my car has two different length of arm and i am trying to establish which is the correct length. Thanks, Fraze
Re: wipr arm length
Exactly 11 inches from the end of the wiper arm to the centre of the hinge pin at the spindle endfraze wrote: ↑Thu Jan 02, 2020 7:52 am Thanks for all the tries guys. What I am after is the length of the arm that holds the blade. (The blade being the part in Clay's photo). This arm pushes onto the spindle which is just below the windscreen. My problem is that my car has two different length of arm and i am trying to establish which is the correct length. Thanks, Fraze
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: wipr arm length
Like this
Sent from my SM-A705YN using Tapatalk
Sent from my SM-A705YN using Tapatalk
When you're faced with an unpleasant task that you really don't want to do, sometimes you just have to dig deep down inside and somehow find the patience to wait for someone else to do it for you.
Foundation member #61 of FB/EK Holden club of W.A.
Foundation member #61 of FB/EK Holden club of W.A.
Re: wipr arm length
there are different parts numbers for fb and ek
Re: wipr arm length
Thanks Blacky, you nailed it! Thats the dimension I was looking for. Cheers, Fraze