GMH Body Id Plate, Chassis & engine No ..... Please post.

Includes sheet metal, rubbers, bumpers, badges and rust repairs.

Moderators: reidy, Blacky

User avatar
Aussie Bob
Posts: 8276
Joined: Wed Mar 14, 2007 12:28 am
State: NOT ENTERED
Location: Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Aussie Bob »

Thanks Rusty, Egyptian Tan with Snowcrest white. Thanks for the chassis number as well.

Does the EK have the original engine or do you know the number?

Thanks so much,

Steve
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Rusty EK »

Steve it came with an engine seperate from the car , so not sure if it is the original , I would say not , as it is a auto body and has a manual box in it , but can check the numbers for you ?
User avatar
Craig Allardyce
Posts: 1464
Joined: Sun Aug 07, 2011 7:26 pm
State: VIC
Location: Stratford

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Craig Allardyce »

Hi Steve,

can you add the following plate details to your list. I couldn't find my FB on the list. I've done some searching and have now found the original engine number and another previous owner too :thumbsup: So far its a Melbourne built car thats been registered in NSW, Qld, and Vic! I wonder where else??
FB225 13046M
633-815
585-9562
585-9889
585-9562
FB29698M
Eng N0 B96098
Grecian White/Apache Red
Mephisto & Chianti Red/Horizontal Fleck (Plain red bolsters)

On the flip side do you or Matt have any previous owner history on the EK ute I bought last year?? All I have managed to trace is a photo showing it registered on NSW Historic plates some time back. Its still listed as being owned by Matt.
d9e6d78f-7c35-4327-ad26-61cfef67581e-lg.jpg
Thanks
User avatar
John
Posts: 717
Joined: Sun May 17, 2009 7:28 pm
State: NOT ENTERED
Location: Ulverstone Tasmania

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by John »

my new one steve.

Subframe EK30157S
Image
Not all chemicals are bad. Without chemicals such as hydrogen and
oxygen, for example, there would be no way to make water, a vital
ingredient in beer
User avatar
holdenutechick
Posts: 361
Joined: Sun Aug 21, 2011 3:38 pm
State: NSW
Location: Finley NSW
Contact:

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by holdenutechick »

:esurprised: Tim I recognise those numbers I believe your nitro black used to belong to my grandfathers brother.
~Allison
My project:
'60 Holden FB ute

Other family projects:
Mum's '54 FJ Holden Special Sedan
Farm Bedford grain truck
gnomester
Posts: 26
Joined: Mon Jul 09, 2012 7:49 pm
State: NOT ENTERED
Location: Blue Mountains NSW

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by gnomester »

My 62 EK hydramatic....

Image

and photo with some trim colours, turret is not origional paint and I do not know if body is Montana grey... but it is grey :wink:

Image
User avatar
Rusty EK
Posts: 830
Joined: Thu Feb 04, 2010 10:58 pm
State: NOT ENTERED
Location: Hobart , Tas

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Rusty EK »

End of the road for this one , but here are the numbers

Chassis FB 27000S
Image

Image


Didnt notice this one when I was taking the pic , but it appears not to be stamped with the letter prefix of where it was made ??????

It has gone to a mates , so will have to have another look at it .
Image
muza
Posts: 807
Joined: Tue Mar 01, 2011 6:09 pm
State: NOT ENTERED
Location: Gippsland Vic

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by muza »

[quote="Rusty EK"]



Image


quote]
Looks like you coulda scrounged a few bits of that one!!!
FB Holden Fernando Yellow/Arctic Beige flash
Stock as a rock
75 series Landcruiser 350 Chev
Not so stock
ekwags62
Posts: 116
Joined: Fri May 13, 2011 4:16 pm
State: NOT ENTERED
Location: Beechboro Perth WA

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by ekwags62 »

muza wrote:
Rusty EK wrote:


Image


quote]
Looks like you coulda scrounged a few bits of that one!!!
Yep my thoughts too. Thought subframes would getting hard to find. Over here in Perth anyway
RobinGi
Posts: 198
Joined: Mon Jan 11, 2010 1:11 pm
State: VIC
Location: Boronia Melbourne

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by RobinGi »

couldn't resist "buy it now"
Image
body ident
Image
Engine
Image
Chassis
Image
muza
Posts: 807
Joined: Tue Mar 01, 2011 6:09 pm
State: NOT ENTERED
Location: Gippsland Vic

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by muza »

RobinGi wrote:couldn't resist "buy it now"
Image
body ident
Image
Engine
Image
Chassis
Image
any more pics? doesn't look too bad from here :lol: :lol:
FB Holden Fernando Yellow/Arctic Beige flash
Stock as a rock
75 series Landcruiser 350 Chev
Not so stock
RobinGi
Posts: 198
Joined: Mon Jan 11, 2010 1:11 pm
State: VIC
Location: Boronia Melbourne

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by RobinGi »

Besides the rust holes in the cabin floor and passenger sill she'e in pretty good shape
i aquired it from a bloke in launching place who towed it from shepparton where its been sitting for 20 years, thats the only history i could get.
any idea what top = 333 ? couldn't find any reference to it in the register
muza
Posts: 807
Joined: Tue Mar 01, 2011 6:09 pm
State: NOT ENTERED
Location: Gippsland Vic

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by muza »

It looks like they forgot to stamp the first 3 numbers?? :lol: :lol:
FB Holden Fernando Yellow/Arctic Beige flash
Stock as a rock
75 series Landcruiser 350 Chev
Not so stock
RobinGi
Posts: 198
Joined: Mon Jan 11, 2010 1:11 pm
State: VIC
Location: Boronia Melbourne

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by RobinGi »

Thanks for that, i does look like someone was testing the No. 3 stamp to see if it works (or half of "666" spawn of satan)
but if anyone know what the 333 reference is i would apprecieate.
User avatar
WayneXG95
Posts: 2565
Joined: Wed Sep 07, 2011 9:42 am
State: NSW
Location: Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by WayneXG95 »

Time for an update Steve... :thumbsup:
Wayne Chambers
President
FB EK Holden Car Club of N.S.W
Post Reply