GMH Body Id Plate, Chassis & engine No ..... Please post.

Includes sheet metal, rubbers, bumpers, badges and rust repairs.

Moderators: reidy, Blacky

User avatar
Bert
Posts: 7
Joined: Fri Feb 17, 2012 10:51 pm
State: NOT ENTERED
Location: Melbourne

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Bert »

Hi Steve,
Here's some numbers off my EK for your records. I'll try and post some pics soon. She has had a respray (red, still with white roof) which is what it was like when a bought it. :)

Body: EK/225-3816M
Trim: 671-969
Paint: 585-0233
Top: 585-0246

Hope this helps.
Cheers.
MattO
Posts: 317
Joined: Fri Sep 26, 2008 10:31 pm
State: NOT ENTERED
Location: South Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by MattO »

Hey Steve details of my FB.


BODY:FB/225-23761M
TRIM:661-818
PAINT:585-9562
INSERT:585-9893
TOP:585-9562

CHASSIS:FB51932M
GreyPride
Posts: 27
Joined: Thu Apr 23, 2009 10:20 am
State: NOT ENTERED
Location: Rural Victoria West of Bendigo

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by GreyPride »

Found another ute today, in the unusual colur of Kiewa Grey, Mephisto red and Maddison grey trim combo, and yes it was a Victoria SEC vehicle, three owners from new (including SEC).


EK2106M - 4546 - M
Trim 904-983
Paint 585-0105

Chassis EK41243M
Engine B313356
62 Silverton Grey Utility with Matador Red and Mawson Grey interior!
User avatar
zulu
Posts: 8
Joined: Sat May 14, 2011 7:11 pm
State: NOT ENTERED

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by zulu »

Steve,

details of old EK Hottie, anyone recognise it or know who built it? louvered bonnet, 186, 4 speed, HR front & rear ends, HK Monaro interior, Torana slot widies, custom grille & dash, purple but was green, looks like it may have had a V8 + Auto at some stage

Image

Image

Image

Image

ta, Gary
GusnElla
Posts: 44
Joined: Mon May 07, 2012 5:42 pm
State: SA
Location: Riverland

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by GusnElla »

G'day, Firstly I wish to say what a great website I stumbled across! Full of Info which has been a great source of enthusiasm this morning. I have an EK Ute but I would like to know how many were painted in Tuscany Yellow? Also I haven't found trim codes yet if someone could help me with that it would be appreciated.

As for Vehicle ID this is what I have got off the car; EK2106-1780-A
Trim;541-985
Paint;585-0249

I was going to modify the car but I thought I best do some research first before I make a final decision. I do have a complete VX V6 & auto, red motors with X2 headers, Sigma 5speed conversion kit, Volvo diff, Complete LH/LX Torana Front end and of course a HR front end if I want to get serious. I do have a small selection of NASCO bits & pieces which I will add to the car ( also looking for other NASCO bits too!!! ) I even have the missus enthused in rebuilding the car (god help us all, lol) The car has been off the road for 20 years and it's about time to rebuild it instead of sitting in the shed!

Any info of bits for the car would be fantasic!

Cheers GusnElla
User avatar
rustysdungers
Posts: 439
Joined: Sun May 17, 2009 7:32 pm
State: NOT ENTERED

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by rustysdungers »

zulu wrote:Steve,

details of old EK Hottie, anyone recognise it or know who built it? louvered bonnet, 186, 4 speed, HR front & rear ends, HK Monaro interior, Torana slot widies, custom grille & dash, purple but was green, looks like it may have had a V8 + Auto at some stage

Image

Image

Image

Image

ta, Gary
HI Gary this car is from mascot has been sitting there for twenty years i was trying to buy it a few months ago but you must have beet me to it :esad: :esad: :esad:
Where were you in '62???
Trev
Posts: 7819
Joined: Thu Apr 15, 2004 6:43 pm
State: NOT ENTERED
Location: Wonthaggi

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Trev »

Maybe you weren't willing to give your shirt for it Rusty :shock: :lol:
[img]http://i47.photobucket.com/albums/f177/trevwood/WOOFTOsmall.jpg[/img]
Woofto Car Club Member No3
User avatar
zulu
Posts: 8
Joined: Sat May 14, 2011 7:11 pm
State: NOT ENTERED

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by zulu »

Gday Rusty,

Yep, thats the one, I've had my eye on it for a while too, but apperently he didn't build it, said he got it from Blacktown area around 20 yrs ago

It was a green car origionaly

BODY EK 225 19618-S
TRIM 753-967
PAINT 585-0246
INSERT
TOP 385-9931
CHASSIS EK 478795
ENGINE RED 186P16856

Gary
Doc Bob
Posts: 436
Joined: Sun Feb 20, 2011 12:12 pm
State: WA
Location: The "CHARRED" Hills of Waroona, SouthWest Oz

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Doc Bob »

GusnElla wrote:G'day, Firstly I wish to say what a great website I stumbled across! Full of Info which has been a great source of enthusiasm this morning. I have an EK Ute but I would like to know how many were painted in Tuscany Yellow? Also I haven't found trim codes yet if someone could help me with that it would be appreciated.

As for Vehicle ID this is what I have got off the car; EK2106-1780-A
Trim;541-985
Paint;585-0249


Any info of bits for the car would be fantasic!

Cheers GusnElla
Steve Jackson here would be a good bloke to ask regarding colours and build numbers :thumbsup:
Now working @ https://www.facebook.com/pages/Fiddy-cu ... 82?fref=ts
Vice Pres FB/EK Club West Oz. & Just Cruizin Street Machiners
'36 Chev Pick-up
'40 Chev Coupe Ute
'62 EK Wagon
'63 EH Roadster
'68 F#*d Fairlane
'76 LX SS Hatch
GusnElla
Posts: 44
Joined: Mon May 07, 2012 5:42 pm
State: SA
Location: Riverland

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by GusnElla »

No worries, thank you i will ask
Mick
Posts: 4104
Joined: Sun Sep 26, 2010 8:47 am
State: NSW
Location: Coffs Harbour NSW

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Mick »

zulu wrote:Gday Rusty,

Yep, thats the one, I've had my eye on it for a while too, but apperently he didn't build it, said he got it from Blacktown area around 20 yrs ago

It was a green car origionaly

BODY EK 225 19618-S
TRIM 753-967
PAINT 585-0246
INSERT
TOP 385-9931
CHASSIS EK 478795
ENGINE RED 186P16856

Gary
was it in a house with a concrete front yard ? i stopped there one day years ago and a 15/16 year old kid came out and was just about to show me the car when a guy in a porsche pulled up across the road and went ballistic :shock: it's not f#%ken for sale f#%k off, he settled down a little when i responded with what's yor f#%ken problem d!k head :lol: rough looking guy in a porsche in that area bit of a rough looking house aswell i started thinking drug dealer has something to hide :?

it did look very much like a car that was around the Mt Druitt area going back 25-30 years ago so kinda ties in with the blacktown 20 years ago bit
sometimes yor just better off shitting in yor hands and clapping

W.S.C.C.A
Woodstock chapter
GusnElla
Posts: 44
Joined: Mon May 07, 2012 5:42 pm
State: SA
Location: Riverland

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by GusnElla »

Lol, typical water-coolled volkswagon owner going off half cocked!
User avatar
Aussie Bob
Posts: 8276
Joined: Wed Mar 14, 2007 12:28 am
State: NOT ENTERED
Location: Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Aussie Bob »

SunnyTim wrote:Steve
My Sydney Black EK EK11774S is missing its PO 478A as it is hydro.
Also, the Sydney FB225 Nitrocellulose heading is wrongly marked Acrylic Magic Mirror.
Could you please email me the excel sheet and I will make a few other minor tweaks to fix some typos? Double dipping if I type it here :D
Cheers
Tim
Hi Tim, added the Po 478A to your Black 225

Steve
User avatar
Aussie Bob
Posts: 8276
Joined: Wed Mar 14, 2007 12:28 am
State: NOT ENTERED
Location: Sydney

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by Aussie Bob »

D61wagon wrote:While amendments are being made i believe my interior colours should be mawson and athen grey not red and grey as listed ,#477 derycks wagon dusk plum wagon :) . Thanks Deryck
Hi Deryck, done all done. Thanks for taking the time to let me know of the correction needed.

Steve
fasteddyfc
Posts: 52
Joined: Sun Jul 31, 2011 9:40 am
State: NOT ENTERED
Location: Albury, NSW

Re: GMH Body Id Plate, Chassis & engine No ..... Please post

Post by fasteddyfc »

Hi All,

Found an old ute today FB 2106-44-s, is it the 44th ute of the sydney line????

Cheers, Eddy
Post Reply