Commodore brakes
-
- Posts: 117
- Joined: Wed Sep 26, 2012 7:59 pm
- State: NOT ENTERED
- Location: Dodges Ferry, Tasmania
Commodore brakes
Hi guys I know this has proberly been covered before but I think my search skills are maybe a bit crappy lately
What would be the easiest way to fit vn commodore disc's and callipers to a hr drum front end?
Cheers Coopa
What would be the easiest way to fit vn commodore disc's and callipers to a hr drum front end?
Cheers Coopa
- bumper
- Posts: 717
- Joined: Mon Dec 31, 2007 10:07 am
- State: TAS
- Location: Devonport tasmania
- Contact:
Re: Commodore brakes
V6 conversion adapter plates
wanker????
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
Re: Commodore brakes
Castlemaine Rod Shop also do the adaptors.
Cheers,
Harv
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
- bumper
- Posts: 717
- Joined: Mon Dec 31, 2007 10:07 am
- State: TAS
- Location: Devonport tasmania
- Contact:
Re: Commodore brakes
I looked at the rod shop Harv but most there stuff Is to hq or eairly commodore, plus it's twice the price!!!
Maybe I didn't look hard enough tho, but I'm happy with what I have, $150 plus postage
Maybe I didn't look hard enough tho, but I'm happy with what I have, $150 plus postage
wanker????
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
-
- Posts: 117
- Joined: Wed Sep 26, 2012 7:59 pm
- State: NOT ENTERED
- Location: Dodges Ferry, Tasmania
Re: Commodore brakes
Thanks Guys, with the adapters do you use HR or VN wheel bearings or are they the same?
Cheers Coopa
Cheers Coopa
Re: Commodore brakes
You're right... went through my paperwork, and they weren't cheap . All I could find in 2003 though (dammit.... I really must finish this project... that's a decade of procrastinating!):
Part SA11 (modified stubs to suit Commodore bearings)
DB010 (Commodore to Holden disk adaptors)
These let me fit VN-VP V8 ventilated rotors and calipers to the HR front end, using Commodore bearings.
Cheers,
Harv
Part SA11 (modified stubs to suit Commodore bearings)
DB010 (Commodore to Holden disk adaptors)
These let me fit VN-VP V8 ventilated rotors and calipers to the HR front end, using Commodore bearings.
Cheers,
Harv
327 Chev EK wagon, original EK ute for Number 1 Daughter, an FB sedan meth monster project and a BB/MD grey motored FED.
- bumper
- Posts: 717
- Joined: Mon Dec 31, 2007 10:07 am
- State: TAS
- Location: Devonport tasmania
- Contact:
Re: Commodore brakes
I'm using the VN rotors also and there disc/hub are one piece, using VN bearings hopefully will only be a few weeks and I'll have my front end together and I'll post pics
wanker????
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
-
- Posts: 117
- Joined: Wed Sep 26, 2012 7:59 pm
- State: NOT ENTERED
- Location: Dodges Ferry, Tasmania
Re: Commodore brakes
Hi bumper how did you go with your front brakes, did you use stoke drum stubs ?
Cheer coopa
Cheer coopa
- bumper
- Posts: 717
- Joined: Mon Dec 31, 2007 10:07 am
- State: TAS
- Location: Devonport tasmania
- Contact:
Re: Commodore brakes
Hr drum brake stubs, a little had to be machined of the top lug for a flush fit tho
wanker????
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
Re: Commodore brakes
Bumper is right Coop my front end is set up the same way HR drum brake stubs machined down so the adapter plate sits parallel (I suppose you would say) y6ou will also have to take a little off the length of the countersunk allen screw so they don't bottom out.
I'm using VP V6 rotors and calipers, calipers are front mounted because I am running a rear mounted rack.
And as far as I'm aware and was told once Holden has used the same wheel bearing on all models since the start but I may be wrong I've been wrong many times before
Regards
Neil H
I'm using VP V6 rotors and calipers, calipers are front mounted because I am running a rear mounted rack.
And as far as I'm aware and was told once Holden has used the same wheel bearing on all models since the start but I may be wrong I've been wrong many times before
Regards
Neil H
Member of WA FB/EK Car Club
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
Frankenstein EK V6 Ute
FB Station Wagon Project
1950's Commer Light Truck (2.5 Ton)
- bumper
- Posts: 717
- Joined: Mon Dec 31, 2007 10:07 am
- State: TAS
- Location: Devonport tasmania
- Contact:
Re: Commodore brakes
Your spot on there neil
wanker????
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/
I'd rather consider myself as an "owner operator"!!
FBEKHOLDENFANS page
https://www.facebook.com/groups/253705454864/