another basic question (rear springs)

Includes shock absorbers, springs and steering linkages.

Moderators: reidy, Blacky

Post Reply
User avatar
toey1977
Posts: 228
Joined: Mon Jul 15, 2013 8:27 pm
State: NOT ENTERED
Location: Traralgon

another basic question (rear springs)

Post by toey1977 »

well for the guys in the know this should be a easy answer but for me that has had next to no knowledge of these cars beside what i have taken off the two i have now the question is are Ute and sedan rear springs the same? or Ute and wagon? basically i need to know so i can get some rear springs for my poor old Ute..
mmmmmmmmmmm dunno
User avatar
oz_ek
Posts: 431
Joined: Sat Oct 31, 2015 8:22 pm
State: VIC
Location: Victoria

Re: another basic question (rear springs)

Post by oz_ek »

Three different sets were used across the range.
User avatar
toey1977
Posts: 228
Joined: Mon Jul 15, 2013 8:27 pm
State: NOT ENTERED
Location: Traralgon

Re: another basic question (rear springs)

Post by toey1977 »

oz_ek wrote:Three different sets where used across the range.

so does that mean sedan, wagon and ute and van run different springs?

sedan 1 wagon 2 ute and van 3?
mmmmmmmmmmm dunno
User avatar
oz_ek
Posts: 431
Joined: Sat Oct 31, 2015 8:22 pm
State: VIC
Location: Victoria

Re: another basic question (rear springs)

Post by oz_ek »

Yep, Sedan four leaf , Wagon six leaf and stiffer six leaf on utes and vans.
The Sedan spring will sit the car approximately one inch lower.
User avatar
toey1977
Posts: 228
Joined: Mon Jul 15, 2013 8:27 pm
State: NOT ENTERED
Location: Traralgon

Re: another basic question (rear springs)

Post by toey1977 »

do you know if they are all the same length from mounts points or were they all different too?
mmmmmmmmmmm dunno
User avatar
oz_ek
Posts: 431
Joined: Sat Oct 31, 2015 8:22 pm
State: VIC
Location: Victoria

Re: another basic question (rear springs)

Post by oz_ek »

Same length.
User avatar
toey1977
Posts: 228
Joined: Mon Jul 15, 2013 8:27 pm
State: NOT ENTERED
Location: Traralgon

Re: another basic question (rear springs)

Post by toey1977 »

thanks mate :peaceout:
mmmmmmmmmmm dunno
Post Reply