fbekholden.com

Had the same issue with the die cast bars on an FB cowl vent.


Sent from my iPhone using Tapatalk

Had them fitted in a few different cars at work. Same unit, different cars. Worked well in land cruisers but in patrols it would slow down going up hills, then when you got to the top they would accelerate way over the set speed. $*#@ dangerous.


Sent from my iPhone using Tapatalk

Astounding ingenuity scooter!


FB ute fixer upper, EK van on rotisserie

Good to know thanks Mick…..


FB ute fixer upper, EK van on rotisserie

Lower thermostat housing Greg.


FB ute fixer upper, EK van on rotisserie

Very good for original, I agree.

METALFIX is a tough, fire-retardant primer designed for application directly over badly rusted surfaces. It converts the rust into a metal phosphate within the paint film and simultaneously forms a protective abrasion-resistant skin which tolerates temperatures from ...

Hi Spanners. Yes the ute has the splash trays per factory. A lot of these cars have them taken off, including the sedan we have. One theory is that having them on actually increases airflow through the radiator.

I speculate that all thermostats allow some flow when theoretically closed. One way to ...

Word had got around you’ve got some EK bits…….


Sent from my iPhone using Tapatalk

The other side I not as bad but similar
Front inner had a repair


Sent from my iPhone using Tapatalk

Yep. Lights working. Exhaust exhausting. Calling it done for now.

On to sills. The drains were mostly blocked. One had been spot welded right in the middle,so this sill is the original. Cheap unskilled labour put these together. https://uploads.tapatalk-cdn.com/20250629 ...

Mission accomplished


Sent from my iPhone using Tapatalk

I was going to paint inside the bars either silver enamel but to impatient to let the metalfix cure.


Sent from my iPhone using Tapatalk

You never know Greg. Takes me for ever to just do this dipshit stuff lately. Once bumpers are refurbed and back on, I still need to complete fisholene application in the sills and rear doors, replace the speedo and cable, and correct the wheel alignment.


FB ute fixer upper, EK van on rotisserie

Richard helped me out with some useable bumper ends. https://uploads.tapatalk-cdn.com/20250627/b43c61d2b1ecfd81d567b0ee4cc724c4.jpg
None the less, the chrome is possibly better on the ones on the car. Just they are dented and bent around the mounts. So I’m having a go at straightening them out ...

Must have retrained it mate. [emoji3]


Sent from my iPhone using Tapatalk